|
RE: FOLLOW UP: Rust Removal DONE! (Pics/Story inside)
ON my '00, there are only a couple screws holding it down... Pop off the shifter bezel (the part with the slider and numbers), it will just pop upward and off, same goes for the one for the 4X4 shifter... There are screws under there holding down the front of the console... You have to remove the inside of the console next, disconnect the screws from the bottom of it, and disconnect the screws on top of it, including the ones that hold the hinge down... Those are the only screws, on mine anyway, holding it down, I want to say 1 under the trans selector, 1 under the 4X4 selector, 2 on the bottom of the storage box, and 4 on the top, it should lift right out of there :)
|