|
Re: bump stops
Quote:
|
Originally Posted by 90Xjay
I know that sounds good and all, but I'd rather just put new ones in while you got it torn apart. To put in new bumpstops on my 1990 requires taking everything apart again, because the spring has to come out to get to it.
Unless his is different, that is just like doing the front lift all over again.
|
yeah thats how it is in my xj,
Quote:
|
Originally Posted by TwistedCopper
That said, you will probably need to extend your front bumpstops some to avoid rubbing the flares with 31's, 3" of lift, and wheels with 4" of backspacing... or you could trim or relocate (cutting sheetmetal) the flares but I'd just go ahead and do the bumpstops because if you don't you'll have to pull the coils again (to install the stops) if/when you realize you need them.
|
i've already taken off the fender flares and plane to cut about one inch off, maybe more if i need it...
__________________
completely offensive, denominational, gender-biased, very original...sig line
1995 Jeep Cherokee SE 2.5L NEW PROJECT! putting in 4.0 HO with ax15...may not sound like much...but its about 70 more horses than the 2.5 i had!
|