|
1055553
It will work, is fairly easy, and is the best way to go to get rid of the problematic internal clutch slave.
What you need from a '94 or newer AX15 equipped Jeep:
Bellhousing
Clutch release arm
Clutch master cylinder
Clutch bearing
Transmission front seal cover (this is what the clutch bearing rides on, easy to install)
Go ahead and get the flywheel and clutch kit from a '94 or newer if you can, '93 was kind of an in-between transition year, the '93 clutch is different from pre-'93 and post-'93, odd-ball.
I just put a '91 tranny in my '95, and had to change over the tranny front cover, due to the differences in clutch slaves.[addsig]
__________________
|