|
173000
You may run into problems if you have a lot of rust. One other thing make sure that the kit comes with new spacers and bolts. Most likely the bolts will be junk and some of the spacers will be shot also. They are easy to do though. 1st take all the bolts out on one side and the front one(the nuts are in the tub and should not turn if there is any metal left). 2nd jack up that side of the tub off of the rocker panel (not too high just enough to get the mount in and out). You should be able to do the front one at this time also. After the new mounts are on the one side let the jack down and put the new bolts back in with anti-seize. Now go over to the other side and do it again. Good luck
------------------
80 cj7, 304, auto, 33's,
|