|
Re: How to remove the heater control knobs without destroying them
You aren't supposed to pull the knobs off. You'll never get them back on as well again, and if your controls are has hard to move as mine, they won't stay on when you pull them. The aftermarket ones don't seem to be tough enough... I have gone through a few vent cables b/c the knob pops off.
The controls feed through the hole in the dash and snap into place. You have to pinch the plastic on the back side of the dash to have them come back out. I'd reccommend just leaving them in as you remove the dash. You should just disconnect the cable connections on the heater box and they'll just come with. It would be easier to remove them from the dash panel when you can see the back side.
|