|
Re: Clutch Noise and Gearing Question..
I dont know about number 1, but number 2 seems expensive... From what I understand (have not done it myself yet, but going to) all you have to do to fix this is take out the diff cover, scrape the old seal with a scraper, put on some RTV silicone to seal the cover (from my research, some people prefer the gasket, others the silicone, but both work), screw the cover back in place, and re-fill the fluid. Should not be more than one morning worth of work...
Anyone care to correct me if I am wrong?
Felipe
__________________
'94 YJ 2.5L, RE 4" Std Lift, Adv. Ad. SYE, Woods Shaft, Alloy Axles with ARB Lockers and 4.88 gears, 62mm TB and TB Spacer, 165A Alternator, Aluminum Rad, BRX Hoses, Taurus e-fan, DCC fan controller, K&N Filter, Gibson Cat-Back, Accell Coil, LiveWires, 19# injectors, 31" tires on AR 15" Outlaw II Wheels, Delta Xenon H4 Headlights, 100W KC Daylighters and 100W Slimlites (Fog), Riptech Wiperboy, Sony sound system (5.25" front, 6X9 rear and 12" SW with amp), Pavement Ends Targa Hard Top.
|