[Bounty__Hunter]

Brake lines will be fine, but you will need cam bolts on the front lower control arms (axle end) if they didn't already come from the factory. The cam bolts allow you to run the caster all the way out to get rid of vibrations after the lift, correcting both the caster angle and the pinion angle.

	Caster Caster angle is the angular displacement from the vertical axis of the suspension of a steered wheel, measured in the longitudinal direction. It is the angle between the pivot line (in a car - an imaginary line that runs through the center of the upper ball joint to the center of the lower ball joint) and vertical.