[IRPancake]

went to a junkyard today. They had alot of cherokee sports, none of them had the same type of overflow so I didn't get that, or a harmonic balancer, trackbar, or a fan shroud, all the things I really wanted to get but we got other little things it needed. I tried taking the trackbar off, but I couldn't get the part with the bushing off so I was going to remove the whole bracket it was connected to, but the bolts were a strange size (or I'm an idiot) and couldn't get it completely off. Is there a way to just unhook the part with the bushing?

	Track bar A track bar is a component of a car suspension system that provides lateral location of the axle. While the purpose of the rear suspension of an automobile is to allow the wheels to move vertically with respect to the body, it is undesirable to allow them to move forward and backwards, or from side to side. It is this latter movement that the track bar is designed to prevent. It is a simple device, consisting of a rigid bar running sideways in the same plane as the rear axle, connecting one end of the axle to the car body or chassis on the opposite side of the vehicle. The bar is attached on either end with pivots that permit it to swivel upwards and downwards only, so that the axle is, in turn, allowed to move in the vertical plane only.