|
1058298
Here's the latest. After adjusting the linkage and smashing my finger so bad the emergency had to burn holes in my finger nail to relieve pressure . I have manifold vacuum in the red line going from the manifold to the Y and then to the vacuum switch at the trans case. No vacuum coming out of the switch to the yellow, green or white lines which go to the vacuum actuator on the front axle. Since the vacuum switch is new is it possible it may be defective in some way or the problem is internal with the trans case. I have rebuilt almost everything on the engine and axles and have never come across something so confusing in my life as this 4wd system.............Bullet[addsig]
__________________
|