|
1059270
I do it with two people.
Do not take off the cover to the master cylinder. You do not want air getting in, that's the point of bleeding the brakes, to get air OUT. And you need the presure.
First get yourself a mason jar and fill it with a little brake fluid. About 2 inches or so. Then get some hose that fits snuggly on to the bleeder valve of the wheel cylinder. Also, make sure that the hose is somehow attached to the mason jar.
Get a "crows foot" wrench that fits the bleeder valve.
Have a friend pump the brakes til they're firm and tell him to hold his foot on the pedal. Then release the valve and let the fluid out. Making sure that the hose in the mason jar is always in the fluid. Do this until no air bubbles come out the hose on that cylinder. Continue til all of the wheels are done.[addsig]
|