|
Re: TFI ignition upgrade
To azipiper151 - The new breather cap should go on top front of valve cover. Question - do you have oil in air cleaner? If so, definitely switch to the combo breather/pcv cap. I did and have no regrets.
To kidcj82 - I would check to see if coil is getting 12 volts when ignition is in "start". This will take two people. Not sure on specifics, but generally, coil should recieve MAX VOLTAGE when ignition is is "start' as compared to when it is in "run". "Run" involves ballast resistor (or some form of ballast resistor) that extends life of coil. Reason coil receives MAX VOLTAGE in start is to give engine best possible enviroment to start.
Hope this helps
Tom
|