Quote:
Originally Posted by SteelHeadz
Remove the ASD relay.What is the voltage of the fused battery+ circuit at the ASD relay connector? . If it's above 10.0volts you have a bad PCM.
|
did check that, and it tested... ( as per diag for code po1389, and p01388 )
the direct jumper to a 12 volt sourse ( for the coil power wire ) would have by passed that right??? that's why the 20 amp in line blade fuse popps now vs the asd fuse.... cause it's not going back threw the pcm or pdc....???
thanks for you help...