i was given a jeep frame with running gear. the only id part was from the dash that said it was a kaiser 1969 dj5 and a tag that i think was gov or military that had warrente exspires (carnt read the date).
now this is where im confussed the running gear is a 4 cylinder with a t90 trans and t18
transfer case. the rear is a dana 41 and the front is a dana ?. the master cylinder for the brakes matched a 66 cj5 (i had to replace that) the 69 one had a threaded hole acording to the website which is why i used the 66.
ok now the questions
1/ wasnt a dj5 2 wheel drive?
2/ did the military use older parts on there jeep to reduce spare parts?
3/ the starter is 12v but for some reason only has 3 field coils ( the 4th is missing) what kinda starter do i need as there seems to be a problem with getting a cheap starter for a 4 cylinder where ever a 6 is cheap also the 66 and 69 seem to be diffrent. if i remember right the starter is a Autolite MDM-6005 and thats a 1966 part number.
4/ clutch rattles when disengaged it looks like the pressure plate is loose when the peddle is depressed. even when the clutch is dragging it starts to rattle so i can not adjust it out. (pushing clutch peddle to far down) isnt there meant to be springs that stops the pressure plate from rattling on the 3 bolts
i kinda welded a golf cart body to the frame and use it as a mud buggy so im always having to replace parts as i break them. i just need to know what parts fit..
thks
glenn