[derff96963]

I got one possibilty. Have you or anyone else rewired your jeep. The coil is supposed to have resistance wire running from the ignition switch to the coil to drop the voltage to only 9 volts on the positive terminal of the coil. Do you have a simple multimeter that you can check the voltage? If you running it with the full 12 volts you need to put a resistor in between the green signal wire from the negetive on the coil to the ignition module. I fried two ignition Modules before I figured this out. I ended up using 4 8 ohm resistors with 20 watts disapation each wired in paralell to get the right resistance and disapation. This keeps everything cool and running good. Let me know what you find out.