need help

rollmeoverplease · #1 (**permalink**) 04-18-2008, 12:46 AM

i have a 1994 wrangler with the 2.5 and the AX5 tranny has died
i found a Comanche with a 2.8 v6 and T5 tranny wondering if i can use the T5 tranny in my jeep (if it will bolt up to my motor with no problems) can anybody help me with figuring this one out Thanks!!!

i believe that the Comanche is also in the 90's if that helps

rollmeoverplease · #2 (**permalink**) 06-13-2008, 12:08 AM

or will an AX-15 work i think that they are stronger but generally used for the straight 6 i would just like some ideas if anyone has any

Bounty__Hunter · #3 (**permalink**) 06-13-2008, 01:51 AM

Neither tranny will bolt right up. You can make the AX15 work with a bellhousing from a 2.5L Dakota with a 5spd.

Another AX5 should last if you use the proper fluid like Redline MT90. Most of the recommended GL5 gear oils are bad on the AX5's syncros.

rollmeoverplease · #4 (**permalink**) 06-13-2008, 11:34 AM

thanks for the help hopefully i can now find something that will work there aren't very many Jeeps here in IN but I'm sure that i can make something work thanks again!!