Stupid Alignment...

[mujaman]

well i took my jeep in to get an alignment job done. i had gotten stuck pretty bad about 2 weeks ago and it seems to have been knocked out of alignment ever since then. the place where i took it was a BFGoodrich tirecenter who is very reputable and has done work for me before. well 2 hours after i had been waiting, they inform me that they wouldn't be able to fix my problem b/c of the fact that it was lifted (3" suspension). they said the camber was way out and that their machine wouldn't work for it. there was another place i could have taken it that day that probably could have fixed it, but i had to leave for college (which is in ohio, and i live in WV) that same day and didn't have time to go elsewhere. so now i'm stuck here in ohio with a jeep that is in desperate need of an alignment. i called 2 jeep dealerships today to see if they could do it... and both said probably so, but they were still pretty skeptical. can anybody help me with this? i didn't think an alignment could be made so difficult by such a simple and small suspension lift?!?!

	Camber Camber angle is the angle made by the wheel of an automobile; specifically, it is the angle between the vertical axis of the wheel and the vertical axis of the vehicle when viewed from the front or rear. If the top of the wheel is further out than the bottom (that is, away from the axle), it is called positive camber; if the bottom of the wheel is further out than the top, it is called negative camber.

[avyoung]

Call a 4x4 store and have them reccomend somewhere. They will know who can.