Forum Reader Rides Videos How-to Section Register Site Map
     
Jeepz.com - The ultimate Jeep and offroad site.
Go Back   Jeepz.com > Technical Forums > Cherokee, Commander, Wagoneer and Liberty
Jeepz.com, the Ultimate Jeep and Offroad Message Board - Welcome Register today!
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 08-03-2005, 10:35 AM
Senior Member
 
Join Date: Jan 2004
Location: TN
Posts: 245
Send a message via AIM to CherokeeGuy42
My engine light has been on in my 01 XJ for a while now and when I had it scanned the first time the guy said my gas cap was loose and low battery. So I replaced the battery and tightened the cap and the light went off for a day and came back. So I waited a while and got it scanned agian and the guy at Autozone said it was a Large vacuum leak. Then I had it scanned agian by a friend and it said a Gross vacuum leak. My friend reset the light and it stayed off for 2 days and came back on. We checked the vacuum lines and they seem to have suction in them so we don't know what is wrong. I'm thinking of buying a new gas cap to see if that was the problem. Anyone had this problem before?

Also when we were checking my lines we didn't notice suction for the vacuum filter line and the purge solinoid was just clicking. You could feel it and hear it if you were really close. Are those things normal or could that be where my problem is? Thanks.
Reply With Quote
View Public Profile Send a private message to %1$s Show CherokeeGuy42 gallery CherokeeGuy42
Sponsored Links - Removed for registered members
  #2 (permalink)  
Old 08-03-2005, 01:57 PM
Saurian's Avatar
Senior Member
 
Real Name: Sean P. Ballantine
Join Date: Dec 2003
Location: Madison Heights, Oakland County, Michigan
Posts: 1,388
Send a message via AIM to Saurian
RE: 4.2L?

My jeep has wheels... :?

Seriously, while I have no idea of that last bit, I do know that a vacuum leak is quite audible... My suggestion, therefore, is that perhaps something is clogged... Are all your vacuum actuated systems working OK... I know that a biggie is the HVAC; if you have it set to vent, and it's only going floor/defrost, there's a vacuum problem, because those doors are all vacuum actuated...

Just a suggestion, that's all I've got. I'd kill for just a nice simple vacuum leak right about now...
__________________
http://saurianentity.livejournal.com

the feeling's forever...
Reply With Quote
View Public Profile Send a private message to %1$s Show Saurian gallery Saurian
  #3 (permalink)  
Old 08-03-2005, 02:05 PM
Bounty__Hunter's Avatar
Moderator
 
Join Date: Nov 2002
Location: Southern Illinois
Posts: 8,401
RE: Axle swap

It's likely an EVAP leak, which has to do with the fuel cap and keeping the fuel system sealed and properly venting. Might try a new fuel cap or look for a split EVAP line coming to or from the fuel tank or charcoal canister.

From what I've read that clicking is normal.
Reply With Quote
View Public Profile Send a private message to %1$s Show Bounty__Hunter gallery
Sponsored Links - Removed for registered members
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


All times are GMT -5. The time now is 01:49 PM.

Message Board Statistics

Jeepz.com RSS2 Feed  
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0