How do you move an axle?

[CherokeeGuy42]

Ok I bought a jeep and the thing has had multiple problems with it and I'm trying to get all the kinks worked out. It goes into speed wobbles around 50mph so I plan on getting polyurithane bushings (since one on the front is blown) and an alignment. My buddy and I got underneath and looked and realized the the front axle is shifted to the driverside about an inch or so. Does anyone have any idea what could cause that? We are going to see if the control arms are bent but is there any other options that could be happening? Thanks

[Bounty__Hunter]

Check the track bar, it locates the axle side to side. Replace the control arm bushings with oem torsion rubber replacements.

	Track bar A track bar is a component of a car suspension system that provides lateral location of the axle. While the purpose of the rear suspension of an automobile is to allow the wheels to move vertically with respect to the body, it is undesirable to allow them to move forward and backwards, or from side to side. It is this latter movement that the track bar is designed to prevent. It is a simple device, consisting of a rigid bar running sideways in the same plane as the rear axle, connecting one end of the axle to the car body or chassis on the opposite side of the vehicle. The bar is attached on either end with pivots that permit it to swivel upwards and downwards only, so that the axle is, in turn, allowed to move in the vertical plane only.

[spunebil]

track bar is my bet too..................

	Track bar A track bar is a component of a car suspension system that provides lateral location of the axle. While the purpose of the rear suspension of an automobile is to allow the wheels to move vertically with respect to the body, it is undesirable to allow them to move forward and backwards, or from side to side. It is this latter movement that the track bar is designed to prevent. It is a simple device, consisting of a rigid bar running sideways in the same plane as the rear axle, connecting one end of the axle to the car body or chassis on the opposite side of the vehicle. The bar is attached on either end with pivots that permit it to swivel upwards and downwards only, so that the axle is, in turn, allowed to move in the vertical plane only.

[berettajeep]

If jeep is lifted that would also pull the axle to the drivers side.

An adjusted track bar or relocation bracket is need to fix.

	Track bar A track bar is a component of a car suspension system that provides lateral location of the axle. While the purpose of the rear suspension of an automobile is to allow the wheels to move vertically with respect to the body, it is undesirable to allow them to move forward and backwards, or from side to side. It is this latter movement that the track bar is designed to prevent. It is a simple device, consisting of a rigid bar running sideways in the same plane as the rear axle, connecting one end of the axle to the car body or chassis on the opposite side of the vehicle. The bar is attached on either end with pivots that permit it to swivel upwards and downwards only, so that the axle is, in turn, allowed to move in the vertical plane only.

[Joopin]

Im suprised you don't have a bump steer issue if the track bar is the case.

	Track bar A track bar is a component of a car suspension system that provides lateral location of the axle. While the purpose of the rear suspension of an automobile is to allow the wheels to move vertically with respect to the body, it is undesirable to allow them to move forward and backwards, or from side to side. It is this latter movement that the track bar is designed to prevent. It is a simple device, consisting of a rigid bar running sideways in the same plane as the rear axle, connecting one end of the axle to the car body or chassis on the opposite side of the vehicle. The bar is attached on either end with pivots that permit it to swivel upwards and downwards only, so that the axle is, in turn, allowed to move in the vertical plane only.