Generric Questions?

[60 Biscayne]

I bought this 2002 or 2003 Wrangler that's been total'd out & now is a parts only Vehicle.
I'm going to remove the couple of things that I need and than let somebody else get the parts that they need etc.......
How do I tell if its got Dana 35 or 44 rears?
What ratio rears is most common for a 4 cyl 5 speed?
From what I'm reading the trans should be an AX5 - correct?
Jim

[Joopin]

Originally Posted by 60 Biscayne

I bought this 2002 or 2003 Wrangler that's been total'd out & now is a parts only Vehicle.
I'm going to remove the couple of things that I need and than let somebody else get the parts that they need etc.......
How do I tell if its got Dana 35 or 44 rears?
What ratio rears is most common for a 4 cyl 5 speed?
From what I'm reading the trans should be an AX5 - correct?
Jim

1.) If it's a Rubicon then it has D44s, it doesn't sound like it is. You can also tell by looking at the diff cover. Most likely you have a D35 in the back and D30 in the front
2.) 4.11 gear ratio
3.) correct

[currupt4130]

If it's a 4 cylinder 5 speed you have an AX-5 with 4.11 gears. D30 front, 35 rear.

[TerryMason]

To be certain you can get the vin off the car, then request the build sheet from chrysler with this link. It's free, and doesn't take long.

[jeepster357]

Let us know what you find out, I was under the impression the gearing would be 3.73. Maybe thats just in the 4.0

[currupt4130]

Wow...

[Bounty__Hunter]

2.5L and 5spd is generally 4.10 gearing and always a D35 rear axle.

Jeep switched from the AX5 to the NV1550 or similar somewhere in the TJ years, anybody know what year?

Where you located at, might need some parts

[jeepster357]

Hey Bounty, this is what I found for Jeep tranny years and makes.
Jeep CJ, YJ Wrangler and TJ Wrangler Series OEM Style Replacement Manual Transmission Parts - Quadratec

[southtj]

Why don't you just take a look and see what you got?

dana 35, push in rubber fill plug



dana 44, screw in fill plug