bds 3 inch lift

[jwhiz]

thinking of buying bds 3 inch lift for my 02 tj sport and put some 32 goodyear kevlars on with this lift am i gonna have to do the sye and driveshart stuff to get everything lined up again or is that only with 3.5 and 4 inch lifts and bigger

[jps4jeep]

in regards to the SYE

have to.. NO

Should... YES

also the 3" lift is a great lift, 32" tires is a bit small, I would go directly to 33's or start the sawzall and trim to fit 35's.

[Bounty__Hunter]

You will need a transfer case drop to lower the belly skid 1", or install a SYE and CV rear driveshaft. The transfer case drop isn't too bad, you're only losing 1" under the belly in clearance after gaining about 5" from the lift and tires combined, so you're still 4" improved belly clearance from stock.

	Transfer Case Mounted behind and driven by the vehicle transmission, the transfer case transmits power to the front and rear driveshafts in 4WD Jeep vehicles and offers high and low range.

[jwhiz]

ya the kit comes with the transfer case stuff what are your thoughts on motor mount lift would i have to do that also

	Transfer Case Mounted behind and driven by the vehicle transmission, the transfer case transmits power to the front and rear driveshafts in 4WD Jeep vehicles and offers high and low range.

[Bounty__Hunter]

No, not necessary.