09-25-2003, 08:10 PM
|
|
Senior Member
|
|
Join Date: Sep 2003
Posts: 463
|
|
|
What is the round hub that goes on the water pump called (it's the pulley the belts go on that drive the water pump). I bent mine the other day, and thought I fixed it by putting washers between the pulley and the water pump (to space it out from the pump a little) and it apparently didn't like the washers as it pretty much came apart today. I need to know what it's called and does anyone know where to get one (I've looked at 4wd and quaratec, but don't know what the thing is called).
__________________
85 CJ7 258, borla header,jacobs, weber, T5, B&M shifter,1pieceaxles,warn hubs/ XD8000i
|
|
|
|
Sponsored Links - Removed for registered members
|
|
|
09-25-2003, 09:01 PM
|
 |
Senior Member
|
|
Join Date: Nov 2002
Location: Olean, NY
Posts: 5,644
|
|
|
its called the water pump pulley... you got it right.... go to a junkyard and aske them for one
__________________
93 YJ 4.0
Spring Over, 33x12.50 Mastercraft Courser M/T, High Flow Exhaust, Diamondplate Rear Bumper, Trimmed Flares, 6\" spotters
We, the Sovereign People of the Universe, wish to live in peace. We live among you, but we are not of you.
|
|
|
09-25-2003, 09:30 PM
|
|
Senior Member
|
|
Join Date: Sep 2003
Posts: 463
|
|
Thanks, reason I was asking is none of my searches have pulled up anybody who has them for sale, and I don't have any good junkyards around here to go to. Anybody got one laying around they'll sell me (cheap  )?
__________________
85 CJ7 258, borla header,jacobs, weber, T5, B&M shifter,1pieceaxles,warn hubs/ XD8000i
|
|
|
09-26-2003, 02:49 PM
|
|
Senior Member
|
|
Join Date: Nov 2002
Location: Olean, NY
Posts: 5,644
|
|
|
might be able to use one off a 258 as well
__________________
93 YJ 4.0
Spring Over, 33x12.50 Mastercraft Courser M/T, High Flow Exhaust, Diamondplate Rear Bumper, Trimmed Flares, 6\" spotters
We, the Sovereign People of the Universe, wish to live in peace. We live among you, but we are not of you.
|
|
|
09-26-2003, 03:30 PM
|
 |
Moderator
|
|
Join Date: Nov 2002
Location: Southern Illinois
Posts: 8,681
|
|
|
|
|
|
09-27-2003, 12:11 PM
|
|
Senior Member
|
|
Join Date: Sep 2003
Posts: 463
|
|
|
D-Rings and tow straps
Alright, my water pump pulley disintigrated couple days ago, and this morning I went out to take everything back apart until the new pulley gets here. I put the pulley back up on the water pump and even without the back side of the pwr steering belt groove, the pulley is still contatcting the water pump. Now I'm wondering if I got a pump that's out of spec (of course like a dumbass I threw the old one out when the new one seemed to be working ok). I got the new pump put on, and after trying to run the jeep realized the pulley was hitting the housing, so I tried to put washers between the pulley and the water pump to space it out where it wouldn't contatct the housing again. That seemed to work, but after about 45-50 miles I hear this awful noise from up front, and the back side of the pulley has seperated from the rest of the pulley. I guess I'll have to wait until my new pulley gets here to be sure (I thought the old one was bent a little and that's why it was contacting the housing), but now I dont' think quadratec sent me the right water pump (or sent me one with a short fan/ pulley shaft). Any suggestions here on what to look at?
__________________
85 CJ7 258, borla header,jacobs, weber, T5, B&M shifter,1pieceaxles,warn hubs/ XD8000i
|
|
|
|
Sponsored Links - Removed for registered members
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:40 PM.
|
