1. #1
    TerryMason's Avatar
    TerryMason is offline Administrator
    Join Date
    Dec 1999
    Location
    Virginia Beach VA
    Posts
    6,141

    Jeep Speedometer Gear Change

    Installing larger tires on your Jeep will give you a few problems to overcome, including an incorrect speedometer. On a stock Jeep, the speedometer knows that when the tires turn one revolution you have gone so far, but when you put larger tires on, the speedometer still thinks that one revolution of the tire takes you the same distance.

    Jeep Speedometer Gear Change-tire-travel.jpg

    This will cause your speedometer to display a speed slower than what you are going, to underreport your miles traveled, and may cause your computer / automatic transmission to shift at less than optimal times.
    Luckily, it's easy to correct this on most Jeeps (Rubicon models will most likely need an electronic upgrade from the dealer). All you need to do is install a new speedometer gear in your transfer case. This gear will have a different number of teeth than your stock gear – the number of teeth on the new gear is determined by the size of your tires. In my case I installed 33 inch tires on my 2005 Wrangler TJ, so I needed a new 31 tooth speedometer gear. I picked one up at Quadratec for $40 (the gear looks like it should cost $4, but $40 is the cheapest I could find).

    This new gear covers the following Jeeps:

    • 93-01 Jeep Cherokee (XJ)
    • 93-98 Jeep Grand Cherokee (ZJ)
    • 97-06 Jeep Wrangler (TJ)
    • 93-95 Jeep Wrangler (YJ)
    • 04-06 Jeep Wrangler Unlimited (TJ)


    Here is what the new gear looks like:

    Jeep Speedometer Gear Change-1-jeep-wrangler-speedometer-gear.jpg

    Jeep Speedometer Gear Change-2-tj-speedo-gear.jpg

    To install the new gear, first find your existing speedometer gear. It's near your rear driveshaft, where it goes into your transfer case. You'll see a wire going into it.

    Jeep Speedometer Gear Change-3-stock-wrangler-speedo.jpg

    Jeep Speedometer Gear Change-4-wrangler-speedometer.jpg

    The speedometer is held in by one bolt, so just unbolt it and pull the speedometer out. Some oil may come out with the gear, so have a drop cloth / bucket under it, and protect your eyes.

    Jeep Speedometer Gear Change-5-unbolting-wrangler-speedo.jpg

    Jeep Speedometer Gear Change-6-speedo-ready-come-out.jpg

    Jeep Speedometer Gear Change-7-jeep-speedo-removed.jpg

    This is the old speedometer gear (red) next to the new speedo gear (green).

    Jeep Speedometer Gear Change-8-compair-speedo-gears.jpg

    Jeep Speedometer Gear Change-9-wrangler-speedo-gear-old-vs-new.jpg

    When replacing the new speedometer gear, you have to make sure that it's pressed up against the teeth inside the transfer case. The way this is done is by rotating the housing until it's in the proper alignment. Once you get everything in the correct position, replace the single bolt.

    Jeep Speedometer Gear Change-10-new-gear-ready-install.jpg

    Jeep Speedometer Gear Change-11-new-gear-installed.jpg

    Jeep Speedometer Gear Change-12-jeep-speedo-replaced.jpg

    Jeep Speedometer Gear Change-13-wrangler-speedo-replaced.jpg

    Notice the different position of the old vs new speedometers

    Jeep Speedometer Gear Change-speedo-old-vs-new-position.jpg

    That's it! You should be able to hop in your jeep and have the speedometer work perfectly. In my case, I didn't rotate the speedo on my first try, and when I drove the Jeep, my speedometer didn't work at all. I simply loosened the bolt and rotated it by hand until I felt the gears mesh, then I was good to go.
    Last edited by TerryMason; 01-17-2013 at 09:51 AM.

  2. #2
    Spud's Avatar
    Spud is offline Member
    Join Date
    Aug 2010
    Location
    Gig Harbor, Washington
    Posts
    41

    Re: Jeep Speedometer Gear Change

    Nice article and great pictures to illustrate!

  3. #3
    TheGhost45's Avatar
    TheGhost45 is offline Senior Member
    Join Date
    Dec 2010
    Location
    Ontario, Canada
    Posts
    147
    Wow thanks didn't know how to do this! And I didnt know how easy it was either! Great article thanks man!

  4. #4
    brian cruz's Avatar
    brian cruz is offline Junior Member
    Join Date
    Nov 2012
    Location
    Guam, USA
    Posts
    1

    Re: Jeep Speedometer Gear Change

    this was really great to know cuz my speedometer doesn't work so im thinking mine is out and needs changing

  5. #5
    JPNinPA's Avatar
    JPNinPA is offline Senior Member
    Join Date
    Feb 2009
    Location
    Dayton Ohio Area
    Posts
    1,613

    Re: Jeep Speedometer Gear Change

    Important. There are markings on the case at 6 o'clock to match the various positions to set the gear at based on the number of teeth on the gear. I believe above the marking is the range of teeth that mark is to be used. If you are going by feel then you will likely wear the gear out from it being engaged too far.
    Retighten to 90-110 in lb torque.

    Good picks and direction otherwise.
    Last edited by JPNinPA; 12-05-2012 at 09:10 PM.
    "Never look down on anybody unless you're helping him up" - Jesse Jackson

Similar Threads

  1. Speedometer gear replacement on a Jeep TJ
    By jeepster357 in forum Drivetrain
    Replies: 1
    Last Post: 05-29-2008, 01:28 PM
  2. Speedometer gear
    By tomve in forum CJ YJ TJ and JK
    Replies: 9
    Last Post: 11-02-2005, 11:24 AM
  3. Speedometer gear
    By NormanW in forum Cherokee, Commander, Wagoneer and Liberty
    Replies: 1
    Last Post: 03-22-2004, 10:25 PM
  4. Speedometer change... 2
    By Joopin in forum CJ YJ TJ and JK
    Replies: 2
    Last Post: 01-07-2004, 08:39 PM
  5. Speedometer change...
    By Joopin in forum CJ YJ TJ and JK
    Replies: 2
    Last Post: 12-30-2003, 08:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in