1983 CJ-7 - FI 350 - 91 YJ Tub

[firemanharry]

Been kicking around the idea of selling my Jeep and I think I've finally talked myself into it. I've only taken it out a half dozen times (if that) in the past year and can't see it just sitting in my driveway doing nothing.

1983 frame, nose, dash, & windshield
1991 tub
Fuel injected Chevy 350
SM 465 4 speed granny trans
Dana 300 transfer case - twin sticked
4" body mount lift on frame
drivetrain raised 4 inches
custom built nerfs / rock bars
full roll cage
flat bottomed skid plate - 3/8 inch steel
spring-over in rear
4" Skyjacker softride in front (it sits level with the extra weight of the roll bar and skid plate)
steering box stabilizer
34x12.5 TRXUS Mud tires (good tread left)mounted on 15x8.5" on Eagle aluminum rims
Warn 8274 with remote and hard wired controls on dash
2" receiver on the front
pintle hook on rear
heated reclining seats
locking steel center console
lock-rite in the front and rear
D30 up front
AMC 20 in back
the 20 has 1 piece axles, the tubes have been welded and it has been trussed across the top
3.31 gears in the rears but with the granny low in the 465 you come up with just about a 56.5 final drive ratio - you can STAND on the brakes in low and not stall or stop
Besttop soft top, doors, and rear seat
disc brakes all the way around
Warrior steel corners in the rear
Optima Yellow Top
radio, fuel & temp gauges do not work - everything else does


It could use a scuff and a repaint in a few spots but everything is SOLID.

$6,000 or OBO

It's in South Jersey, if anyone is interested or has any questions give me a shout.

Thanks, Dave

	Transfer Case Mounted behind and driven by the vehicle transmission, the transfer case transmits power to the front and rear driveshafts in 4WD Jeep vehicles and offers high and low range.