Various Jeep parts for sale or trade

[97superjeep]

For Sale or Trade

$500.00 Transfer case with Slip Yoke Eliminator Kit installed
$400.00 Rims, 16" alloy, TJ Bolt Pattern, 5x4.5, 5 spoke star, from a Cherokee
$100.00 2" lift springs
$30.00 2" Front shocks (Explorer Procomp ES300)
$50.00 4 Shocks for 6" lift: Skyjacker softride nitro
$50.00 6" Skyjacker lift mounting brackets (no springs or track bar)
$150.00 IPF 500 Watt Head Lights with Wiring Harness
$50.00 9000 lb Wench Cable, 80 feet
$50.00 Roller Flare for Winch
$25.00 Steering stabilizer shock, Skyjacker Superride Hydro


Stock parts for sale
$50.00 Transfer case output shaft (rear) and housing, stock 97 TJ
$50.00 Radiator, 4 cyl, stock 97 TJ
$25.00 Roll bar covering
$50.00 Alternator, 4 cyl, stock 97 TJ
$25.00 Rear drive shaft, stock TJ
$25.00 Starter, 4 cyl, stock 97 TJ
$200.00 A/C compressor, stock 97 TJ
$200.00 Engine, 4 cyl, stock 97 TJ, 44,000 miles


Things I need:
Full Hard doors TJ
Bead locks 5 X 5.5
Rock guards TJ
Fiberglass upper half doors TJ

Contact: Andrew (253) 861-3197 or e-mail: rayneerella@hotmail.com
Located in Lakewood, Washington

	Transfer Case Mounted behind and driven by the vehicle transmission, the transfer case transmits power to the front and rear driveshafts in 4WD Jeep vehicles and offers high and low range.

	Track bar A track bar is a component of a car suspension system that provides lateral location of the axle. While the purpose of the rear suspension of an automobile is to allow the wheels to move vertically with respect to the body, it is undesirable to allow them to move forward and backwards, or from side to side. It is this latter movement that the track bar is designed to prevent. It is a simple device, consisting of a rigid bar running sideways in the same plane as the rear axle, connecting one end of the axle to the car body or chassis on the opposite side of the vehicle. The bar is attached on either end with pivots that permit it to swivel upwards and downwards only, so that the axle is, in turn, allowed to move in the vertical plane only.

[far_right]

sounds like you have done some mods, what are the specs on your jeep?

[L33TJ33P]

Sent you an e-mail for some of those parts. 2" springs and the ES300

[jhiggins]

Are these all for a 97????

[Check-Six]

Is the transfer case for a manual or automatic? Is it a NP231?

Thanks, -Chris

	Transfer Case Mounted behind and driven by the vehicle transmission, the transfer case transmits power to the front and rear driveshafts in 4WD Jeep vehicles and offers high and low range.

[pinaplebob]

what is the bolt pattern or how far apart are the holes on the roller failead?

Thanks

[Joopin]

I'm interested in the transfercase/sye more, I need an np231-manual trans. thanks