Gauges Switching Off

T-rav · #1 (**permalink**) 06-03-2009, 01:31 PM

I have a 1990 jeep wrangler yj and I took my Gauges out the other day to but new one's in. ( stock gauges ). They work great but when I turn my headlights on I loose all power going to the gauges. They go completly dead. When I switch the headlights off the Gauges come back.

. Any help would be appreciated.

SteelHeadz · #2 (**permalink**) 06-03-2009, 01:37 PM

I'm guessing you have a bad ground somewhere that shares the circuit with the lamps.

T-rav · #3 (**permalink**) 06-03-2009, 01:40 PM

Any advice on how to find it ?

SteelHeadz · #4 (**permalink**) 06-03-2009, 02:11 PM

Re-trace all the connectors you have dis-connected and re-connected. Also, you can do a what i call a wiggle test. With the engine @ idle, headlamps on, wiggle the connectors and see if the instrument cluster intermittently comes back on. If you touched or disturbed the loose connection, it will be a lot easier to find the circuit responsible for the inop gauges when they show response to the wiggle.

sickem · #5 (**permalink**) 06-03-2009, 04:39 PM

good advice. either that or whip out the test light for 6 hrs

T-rav · #6 (**permalink**) 06-04-2009, 03:35 PM

Thank's alot steelheadz. Turns out that it was a bad ground with the circuit with the lamps. Everything is working good as new.