|
Re: Door switch for dome light not working.
Check all the fuses first. I'm not for sure if it's got it's own fused circuit or a shared circuit with another component. Disconnect the wire connector from one of the switches then use a short wire to jump it, if there's still no dome lamp, use a voltmeter and trace the signal wire to the dimmmer switch module and verify it for 12volts. if there's none, trace that circuit to a known good 12v supply and jump the circuit and see if the dome lights up. if it does, the problem could be the dimmmer module itself. Make sure that the bulbs are properly seated in the socket and free of corrosion.
__________________
Confucious says: Don't eat the snow where the huskies go!
|