Recent content by Jeepz4Mee

Utah Jeepster: I saw that steering setup in a JP magazine article a couple months back. Dont you have to you do anything with your knuckles on your axle to get those components on? Also, does that setup fit both dana 30 and dana 44 axles? Also, I thought that if i just got another locker...

Yeah, well i guess what is considered moderate wheeling? I like to push the limits with my jeep. Also, i have a spartan locker in the dana30, so I am guessing I will break something shortly. What do you guys usually carry around for spare parts for the front axles. Im thinking spare shafts...

Im looking into replacing my Dana 30 in my 2001 TJ, however, the new dana 44 bolt ons from a number of different companies has gotten me thinking of just swapping out a more reliable axle. When I say upgrade the dana 30 I would pretty much only replace the axle shafts with chromoly ones because...

I just ordered one of these Original Replacement Parts 52005285 - Pitman Arm for 97-06 Jeep® Wrangler TJ with 4" Lift & 93-98 Grand Cherokee ZJ 0" Lift - Quadratec hopefully its not a big piece of crap, so I can test whether it is the pitman arm or the steering box. I removed the pitman arm...

I do not have the old one anymore, but I think I have the Durango one. Ill give that a try and see what happens. Also, is there only one way the pitman arm inserts onto the sector shaft? Just asking so I dont have it at the wrong degree. Also, this pitman arm fit fine on my stock box, so I...

Yeah, I made sure I didnt need a new pitman arm multiple times before doing the swap. Also, the stock lock washer is torque down all the way, but its the threads on the sector shaft arent long enough so I am running out when tightening it down. I think I am going to need a washer that goes...

So on my way back from Wheelin and I noticed that my steering had about 3-4 inches of slop in it. After the getting home and waiting for the rain to subside I got under the jeep and had my significant other turn the steering wheel back and forth while I looked at all the components. I soon...

Hey quick question here as I think I know the answer. Will axle shafts for a 95 cherokee dana 30 fit in a dana 30 for a 2001 TJ? I think they will, but I would like to get some of your opinions.

Hey does anyone know if I can get a 4.0L motor and ax15 transmission out of a 97-Present Jeep Cherokee and put it in my 95 YJ? :shades: Trying to use a newer engine in my YJ, since I went 4wheelin this past weekend and didnt have the torque that i wanted. If this is possible, what all do i...

I have a 62mm TB spacer in there right now. How do i increase the size of the intake manifold? Do I take it somewhere to have them increase the size? Also, how much are you selling your bored out TB?

I have a 2.5L YJ, and I am going to do the 4.0L throttle body and the 19# fuel injectors modifications. First, I can get a 97 TJ 4.0L throttle body for cheap, so I was wondering will that work with the computer and will it fit on the intake manifold? Second, between which years are the 19#...

Bounty is right about the transmission fluid. Replace it with synthetic, I replaced mine with the walmart brand 75w-140, and my sychro ring problem vanished.

I had thed same problem with my 95 wrangler. It turned out to be the exhaust\intake manifold gasket. Not hard to replace and is cheap.

I have a set of what i think are aluminum, but I could be wrong. Anyways, they have some kind of rust or film on them. Does anyone know how to make them shine again. Thanks in advance,

I am moving to Columbia South Carolina, anyone know of any trails or other Jeepers that I can run with?