Recent content by k-2

Take away from this: LIFTED TOWING 70 MPH MODIFICATIONS TAILGATNG what a recipe

engine is cranking bbut will not start, spark is good? If that is correct check fuel pressure with a gauge, a weak pump wll not perform in he colder season.

jiffy lube is OK for oil changes. Firestone is OK for tires. You need a automotive technician, I will take a SWAG - supposedly* the battery is checked and the Alternator is checked, BUT was the circuit between checked - maybe fusible link? *Will need a second check

keep original PCM! Scan and post ALL current codes. Tell us what troublehooting you did? Is the security ligh on or was It on? Will need to use a scanner, NOT key on off trick. PS Where was ign key during the work done?

fuse box #9 a 15amp.

A thought - next time it starts to 'act up' - shift to N - let us know if it smooth's out while in N. Did you try accessing the codes as per the above video ?

the sensors plug in SO- why are you needing color codes? Is there a reason to replace sensor? sensors come from jeep not aftermarket

step 1 get the vehicle scanned - yes even if light is off. scans are FREE fast and easy at most auto parts stores. POST all numbers here, someone will advise. step 2 check fuel pressure using a gauge.

Lets start with easy FREE checks..... take your jeep to a local auto parts store, many will scan the system for FREE- copy down any codes they give you and post here. or get the codes yourself -- just turn key from off to RUN (not start) -off- run. off run , off run - the codes will appear...

suspicious - that visual damage totaled a vehicle valued at over 10K ? And it has a salvage tittle?

check fuses do not just look at them fuse box underhood PDC F1

a I suggested work the cam issue - the above list Is what to check...The circuits wiring and th connectors. The programming may require a jeep scanner- I do not know if the combination gears, tires can be programed - might not be a selection.

parking brake cables

I would work the CMP sensor as a separate issue - and that is likely a wiring issue. Possible Causes p0369 (F856) 5-VOLT SUPPLY CIRCUIT OPEN (F856) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND (K441) CMP SENSOR SIGNAL 1/2 CIRCUIT SHORTED TO VOLTAGE (K441) CMP SENSOR SIGNAL 1/2...

try scanning for codes- must use a scanner. Don't know till you look Any chance remote starter - or modified wring? somethng dumping saved data -adaptives