Recent content by overboard63

Half doors to full, soft top to hard and while I'm sad to see the soft top go it gets cold as hell up here

Thanks to all that replied I ordered a master and slave cylinder unit off the internet I just put it in and it works fine I honestly don't understand what was wrong with the ones I had purchased I got both at autozone and neither leaked

I have the external slave that doesn't have a bleed screw so to bleed it I have to turn it vertical and pump the crap out of the piston I have banged it to loosen up air bubbles the line then just to make sure I have hooked it up and pumped the hell out of the clutch pedal and still nothing

I have a 1994 wrangler 4.0 and a couple of months ago I was in an accident and had to replace the transfer case soon after my transmission was making a ticking sound and at the end it wouldn't go into gear, I replaced the transmission and it wouldn't go into gear I replaced the clutch and still...

Update -- thank you all for suggestion and after ruling out the drivetrain and driveshaft I believe I have located the issue I toke the intake manifold off and the exhaust and surprise surprise there is a crack on the top weld near the engine I'm going to replace the manifold and see what happenes

Update-- I disconnected the front driveshaft to rule out yjoints or bad yolks and still the sound but now after listening to it more it sound like an exhaust leak however I don't hear it at idle or when the rpms are raised at idle only when doing and applying the gas, does this happen with...

I have a 94 Jeep Wrangler with the 4.0 I got into an accident when some woman pulled out in front of me and banged up the front. The axle broke the leaf spring and pushed the driveshaft into the transfer case cracking that open I replaced the leaf springs, u bolts, shocks, sway links, and of...