Recent content by saar

I had 29" with 1.75" lift. 31" didn't fit. always rub... Saar

Why would you like to have it on board? I find it more comfortable when I can take it with me. Saar

Hi, with 2" you will only need new shocks for the rear end. the front may be the same (I used them for 3 years like that, with no problems). It is cheap, it will get you higher, 30" tires will fit. Saar.

hi, Reduce extra weight, remove roof racks, use AT tires and not MT. Do not press on the gas pedal too often... :-)

Hi, As far as I understood, if you have 2 cat's then you have 4 O2 sensors, otherwise, you have 2. That is what the support at rock auto told me when I replaced my O2 sensors. Saar.

I think that the voltage regulator is in the ecm (at least in the newer models) Saar

What about the wiring to the ECM? Did you check it? Saar

thank you, I will check that. Saar

Hi, After some wheeling yesterday, the ABS light turned on. It seems the sensor is fine but the wires are not... RE superflex 3.5" installed, does anyone know about wiring replacement to longer wires? thanks, Saar

+1 for that. Saar

I use JKS for the 3.5" lift, if they have a version for the 8" lift, they work great. Saar

Hi, Did you check/replace the CPS? Saar

I'm not sure how it works in ZJs, in the XJ the dash has 3 connectors behind it. if the connections are not good (something moved?) then you'll get that issue. sometimes, just trying to move the cluster in its place helps for that, sometimes you'll have to remove it and check the connections...

Cool :-) ZJ truck :-) Nice idea and nice implementation.

Hi The nuts should be welded to the body. that how it came from the factory... You have to remove the bolts, not the nuts. Saar