Search results

I had that problem until just a month ago, I had a small leak in the fuel return line from the filter that allowed air in and all of the fuel to run back down to the tank or on the ground. I replaced all of the hoses in the engin bay and fixed the problem. Also if you are still running a stock...

My '85 CJ-7 has one, and my old '82 Scrambler had one too.

Mine is on the head, Port (driver's) side, all the way back by the firewall. It is brass 1/2" hex on top with 1 wire on a stainless threaded post. When the temp goes up the resistance on the sensor goes down. To check the gauge have someone sit inside while you ground the sensor wire to the...

What color would you call that..."Razz-berry"? Looks comfy enough for a road trip.

Jeep 4.7 Thanks to all for the help, I'll be sure to line the Uni's up to flex together. I got in there today and took the shaft the rest of the way off. Both of the U bolt brackets and 3 of the bolts were missing from the T-case side...the 4th one is sheared off on the output flange still...

CA:Stock TJ coils,shocks(gas high with 30" wheel packag Well, I was whooping it up on the beach that runs along the San Diego Bay this evening and somehow dropped my front drive shaft off of the T-case. I didn't get a chance to get up under it yet, but in mt Chilton book it says just hook it...

If you live close to the water, go to a surf shop, they sell repair kits for surfboards (fiberglass sheets and the epoxy).

If you cant find belt dressing...I keep an old bar of soap in my tool box and apply it liberaly to the belt (carefully) when it's running. It kills the whine for a few days. Also take a peek at your pulleys to make sure they are all straight. I had a annoying whine after a "fun session" and...

Hello, is there anyone in here? The doorbell button will work fine. I used one for the second "Hooga" horn on my '83 scrambler. I played with the position using double side sticky tape before I drilled any holes on the dash and routed the wires, just to make sure it was in a comfortable place.

OK

33

Image how to "Does that kit or any that you have seen include a button to sound the horn? I'd rather not use the horn cap if possible?" Hey noskils32 I didnt see ant specific buttons at JCW, but if your local auto parts store is short of good horn buttons, try Home Depot for a "Stylish"...

"Anyone have info on the button? Thanks." I looked all over the JCW web site with no luck, but you could try your local auto parts store...or Home Depot, for a small metal doorbell button. Mongo

they are pretty cheap, and easy to mount (if you don't mind another hole or 2 in your fender) http://www.jcwhitney.com/webapp/wcs/stores/servlet/ProductDisplay?Dx=mode+matchall&productId=51&catalogId=10105&Ntx=mode+matchallany&langId=-1&storeId=10101 Mongo

"It often dies and stalls when I slow down to make turns and when I slow down to make a stop or when I am at stop on a red light. I changed the fuel pump (the old one was leaking), fuel filter and the air filter. Is this a carburator problem or?" Do you have the Carter BBL carb? Does your...

Any luck finding your problem?

:D Whooooo Hooooo! I installed the "Team Rush" TFI ignition upgrade on Saturday and the Jeep screamed to life! I wish I knew exactly what was wrong with it before (coil, dist., wires...) so if it happens again I can fix it or help someone else...but at least it's working now. Thank you again...

Thanks for the help Sully. I'm going to try the TFI upgrade before I switch back to my spare Carter BBL. If it works I'll be interested to figure out what was bad or if it just needed a little "FM". (Freakin Magic!) I'd rather be lucky than good, any day! :mrgreen: Mongo

Finally borrowed a buddy's gauge, and the fuel pressure reads at about 4 psi. Checked the plugs, looking normal...BIG spark, so the juice is gettin' there. Im running out of Ideas. Anyone?

Well, I got through the fuel system last night and besides a tempermental fuel sending unit it's providing gas OK. :? Besides the obvious checking for fouled plugs...and spark at the end...what other electrical bugs would just make it quit like that? I'll take any troubleshooting help I can...