Search results

1054430 body lift = bad, my friend had a 3 in body lift along with SOA suspension, just got into a fender bender, got him from behind, only about 7 mph, but it slid the whole body forward and did almost $8,000 worth of damage!! :-O [addsig]

1054535 damn, the 4.0 really takes 6 quarts? my 350 only takes 5[addsig]

1054582 my old 4 banger called for four, took 5, never could figure out why Quik[addsig]

1054583 yeah the state just closed down the only 4 wheeling spot here on the eastern shore of MD, said it was detramentive to the state forest and wildlife, now all we have is the beach, those bastards quik[addsig]

1054610 I put a 4" suspension with 1.5" lowering kit on the transmission, i had to cut some sheet metal to allow the shifter to move easily into 2nd and 4th, no problem with R or 4WL Quik[addsig]

1054612 Here's some pic's of mine before the 4" lift and the 350, i'll be gettin some more pics as soon as it warms up and i can get the jeep clean again. Quik anybody know why my pictures wont work??? they're hosted on geocities Pic 1 Pic 2 edited by: Quik8slvr, Feb 10, 2003 - 11:57...

1042536 1991 Wrangler, lots of extra's including: procomp stage 1 4" suspension lift, Confer shackles, Rebuilt Transmission at 90K, gibson cat back exhaust, new Hi flow cat converter, Bestop Seat covers, bikini top, and Deck Cover, brand new Roll Bar padding, Factory Hard top, CB radio and...

1044434 Im looking for a shop on the East Coast, MD, DE, VA, PA, NJ area, that anybody has information on getting a 350 into a 91 YJ...talked to the guys up at east coast offroad but that might be a little to far away for such an involved conversion so any information would help...thanks [addsig]

1044562 I was wondering if anyone out there has any experience with these kits...im getting ready to do a Chevy 350 swap and i want fuel injection but a TBI or TPI swap is a whole lot more complicated then a Carb. engine, anybody know how hard of an install the holley kit is? how well it works...

1045008 i know this is probably the wrong place for this, but im looking for a re-buildable chevy 350 carb. engine...any body know where i could find such a beast???[addsig]

1045009 i was wondering...my stock yj is equiped with 4.10 gears....after swapping in a chevy small block im looking to change gears, i'd like to keep off-roading in mind but this is more of a daily driver/street jeep that only sees moderate trails and beaches so a small sacrafice in...

1046287 Im having some problems with my heater, whats happening is after the engine warms up and its been running its still blowing ice cold air (cause its 20 degrees out) eventually the temp guage will read way up into the red, now if i play with the lever and switch from off to vent a couple...

1046887 old engine (complete with computer) and transmission out of my 91 YJ...engine has about 118 K on it and the transmission is in need of a new 2nd gear synchro...a worth while rebuild for anybody looking to save some money, if i cant sell it its just going to hit the junk yard so make me...

1046889 I've got a Chevy 350 engine which is currently bolted to a TH350 auto transmission, my friend also had a V8 conversion in his jeep and just totaled it the other day and i can get his 700r4 transmission, adapter, and drive shaft for whatever i sell my TH350 etc for. Whats everyones...

1047306 I've got a whole lot of free time coming up this january because schools out for a month and a half so i think im going to be kind to my jeep and give the frame, engine bay, and other various parts a nice coating of some kind of rust protectant, i just wanted to see if you guys had...

1048124 even jeeps sometimes baffle me but get this.... Im driving my sisters 94 Nissan Sentra, the problem is that the temp guage appears to be broken, after the car has run for 30-35 min it is barely registering about "Cold" so it would just appear to be a broken gauge right? well this is...

1049480 looking for a price on a dana 44 rear end, email me at Jad8580@salisbury.edu[addsig]

1049847 Im thinking about swapping axels since my tiny dana 35 and 30 probably wont hold up to long under my heavy foot and all the power from this 350, i found a set of Dana 44's off of an older Grand Wagoneer with 3.07 gears (which will be nice on the gas mileage too) my question is how hard...

1049848 just checkin to see if anybody knows any trails/pitts etc in the lower MD/DE area, or if anybody from this area is going anywhere...been itchin to test out this new 350.[addsig]

1050457 Im looking to swap out my Dana 35 rear and put in something stronger, something that can handle the 300-350 ft-lbs of torque my engine is making, i've thought about the Dana 44, but have also heard some good things about a ford 9" rear end, does anybody have preferences or opinions...