Search results

1045563 <TABLE BORDER=0 ALIGN=CENTER WIDTH=85%><TR><TD><font class="pn-sub">Quote:</font><HR></TD></TR><TR><TD><FONT class="pn-sub"><BLOCKQUOTE>http://www.avengersuperchargers.com has blowers for the 2.5 and the 4.0 for around $4,000. For the money, I would rather do a V-8 conversion for around...

1045564 a locker in the front and you wont have much of a front axel left if you try to make a tight turn on pavement...but it sounds pretty normal to me, i'd try to leave it outa 4wd unless you're off-road otherwise you'll be spendin some money on new drivetrain parts[addsig]

1045565 i wired my fog ligths in with my headlights, so they're both on together, but mine stay on when i put my brights on...guess the do it yourself version works out better[addsig]

1045869 i've used the lucas in my old 2.5 L, it was dying to begin with and already sounded like shit, but it stoped up an oil leak pretty good...who knows[addsig]

1046101 if they will work/can be adapted to a YJ count me in too[addsig]

1046388 The radiator and fluid levels are all fine, brand new radiator, all new hoses, i just did my engine swap last month, i'll check out the heater unit and see if maybe something got messed up last time i was out in the mud or when i did the swap...i know the problem with the cables because...

1046719 the transmission will work, goto www.advancedadapters.com for more information they're a lot of help in these conversions the 700r4 is actually a fairly good transmission to do the swap with for on-road performance[addsig]

1046942 yeah i think im going to stick with the TH350 because when i bought it i did a full performance rebuild, and the 700R4 was only a stock rebuild...it would just be nice to have a 4 speed[addsig]

1046943 on my 91 yj you have to take a wrench and then use your hand and turn in opposite directions on the metal piece that is below the knob, not sure about a CJ-5 tho[addsig]

1046944 well when you're talking 5 or 6" of suspension lift i would personally go with the procomp CSC stage 2 kit, i think its overall 5" of lift, but the coil springs are sweet as hell i've got a budy who just did the lift, its a good lift, and he clears 35's with plenty of articulation and...

1046945 Transmission is sold but still have the complete engine[addsig]

1046978 Mine used to short out randomly when i had an amp hooked up, but i could never find the short anywhere...but im no electrician[addsig]

1047021 my 2.5L used to like to think it was a V8, but now that i've got a V8 i'll tell you that its a whole other ball game...i will tell you some quick ways to give the 2.5L some bigger balls, and thats Hollow out the Cat (or buy a free flowing one), Cat Back Exhaust, Borla Header, Air Raid...

1048544 thanks for the help everyone...got to see a great game and came back only to find out that the car was working normally again, perhaps the thermostat got stuck in the open position and then un-stuck itself...the needle would move up slightly when it wasnt working, but still not into...

1048564 A ford swap shouldnt be any more difficult then my chevy swap, just be prepared for a big price tag, and a new set of axles if you've got a little to much lead in your foot.[addsig]

1048808 my jeep performs great in the snow, i dont have lockers or anything yet so the only thing i can accredit it to would be tires, get yourself a nice set of aggressive all terrain tires and a set of wider rims, pep boys has american racing waggon style rims for like $35 per rim that should...

1049515 the 3.07's should get you better gas mileage, the lower the gear (higher numbers) the more your gas mileage goes down....as to why you're only getting 10 mpg i have no idea, my 2.5l used to only get 12-15 on the highway and my 350 gets almost 18 who would have thought an engine with...

1049753 i went with the Bosch platnium +4 plugs in my 350, if you're changing plugs for a tune up i'd also recomend changing wires, a good set of wires can be a little pricey but can also make a world of difference, i personally went with the Bosch 8mm wires[addsig]

1049860 anything you can put on, you can take off if something breaks [addsig]

1049915 The guy i talked to said they were 44's, and said the perches were in the right places already, my real concern is that he wasnt using the NP231 t-case, and since the 231 runs off of vaccum lines and the 44 doesnt, how much modification would be needed to adapt that axel to my NP231...