Search results

Basically what the title says. I've had a couple people interested in some front bumpers and I can get a better price from my laser guys if I cut a full sheet instead of cutting a partial sheet. Bumpers are $155, but if I can get 10 people with some interest and commitment , the price would be...

Your jam nuts that is....I had my rear axle side Johnny joint pull out from the lower control arm at about 55mph last week. Not fun driving into traffic at a 45 degree angle. Just a friendly reminder to check and tighten your jam nuts often:lol:

Hey guys, its been awhile. Finally moved into the new house and digging stuff out of boxes. I still have 2 sets left from a group I had cut last year(or maybe it was 2 years ago?). They come with all stainless steel mounting hardware. Made from 3/16" HRPO, they have 6" of side coverage, 8" of...

I also have this posted in the events forum. Come one, come all! Hope to see you on the rocks, Paul

Laser cut 1/2" thick mounting plates for making rear TJ bumpers. Mounting holes are 1/2" in dia which gives a little wiggle room for deviations in the each frame. Requires 7/16" mounting hardware. $15 per pair Approx. 10 pairs available. Ships USPS flat rate. Not sure if a pair will fit in...

I have 2 sets of prototype TJ Rock Sliders left. Here's the specs: - 6" of side coverage and 8" of bottom protection - Made from 3/16" HRPO A36 Steel - Laser cut mounting holes, mounting backing plate, and body mount cut outs for consistant precision - Flare to Flare coverage - Mounts with all...

Well I have a couple of my prototype rocker guards left. 2 sets to be exact. Here's the specs: -TJ rocker gaurds with 6" of side protection and 8" of bottom protection -3/16" thick laser cut -Each rocker mounts with 6 bolts on the side and 6 in the bottom. -Provided hardware is all stainless...

Hot off the laser bed! Made from 1" thick plate steel and designed to take a 3/4" clevis (pretty standard size for Jeeps and like weighted vehicles). These pull points are designed to mounted though a 2x4 bumper and incorperate my no pull though design. $30 for a pair $25 for a par for more...

Its been in the axle for 12 months, 4 months of that it sat in the garage. Only 2 wheeling trips on it. This thing is in really nice shape, no wear yet and the springs still have most of the paint on them! Looking for $225 Comes complete with locker, oringinal box, paper work, and zytanium...

Once again, the North Shore Wheelers will host our annual open house trailride event at the Gilbert Off road park. This event is geared towards the beginner wheeler, and serves as an introduction not only to the park and what it has to offer, but as an introduction to safe and responsible 4...

There's gotta be someone from the great state of Minnesota?

I've been designing some hard parts for TJ's (mostly front bumeprs) the past couple months and again thought I'd ask around here for some input. I just finished a rocker slider design, so far I have a protype and a short production run for some friends. I was interested to see if you guy would...

Its been in the axle for 12 months, 4 months of that it sat in the garage. Only 2 wheeling trips on it. This thing is in really nice shap, no wear yet and the springs still have most of the paint on them! Getting a D44 so no need to keep this. Looking for $275 Comes complete with locker...

I currently have 4 these ready to ship. Made from 1/4" with 1" pull points. Bumper measures 44" wide and mounts with factory hardware. These are very stout bumpers. Jeepz members price $120 and I can do better on shipping if you give me your zip code. 97-06 Jeep Wrangler "Rock Thumper" Front...

Take a look............ Jeep Wrangler/Rubicon Front Diamond Plate Bumper NR!!!: eBay Motors (item 180525126049 end time Jul-01-10 16:10:25 PDT)

I've been working on a shorty front bumper design for the past couple weeks and this is what I've come up with....... Its a C-channel design that mimics a stock front bumper. Its been cut to 44", kept the same height, and trimmed at the corners for more clearance. For added beef, the bumper is...

I'm demoing/"cold weather" testing a set of Modern Classic Enterprises Flatty Fenders. I just got the finishing touches done and want some input on them. So far what I have heard is they're ugly. I haven't done much testing on them yet, but needless to say I won't be keeping these. They cost...

I'm doing some cold weather testing for a company called MCE (Modern Classic Enterprises) on a set of thier new plastic flat fenders. I want to put them on my DD TJ since it sees the most salt, cold, and trail time in the winter. However, I don't want to cut up my current fenders since they're...

Just wondering if any of you jeeperz are from around the Midwest area. I'm heading up to the Gilbert ORV park this weekend and was curious to see if any of you folks might be in the area wheeling. If not have a safe and happy 4th.

I'm looking for a set of full soft doors for a TJ. Black in color. I've been on E-bay but everything is way over price and craigslist is looking to promissing. Thanks.