Search results

ok so i have a 98 cherokee with a 4.5 in lift...and 31's last week i hit a mound of ice and knocked the alignment off a bit...take it down and they tell me that the axle tube could be bent but they don;t know for sure...and that it needs a corrective lower ball joint or somethinging or...

98 cherokee sport...4.0...stock... sometimes the a/c works...sometimes it does not... my wife just recently told me about this so i'm not sure about the details...but i wouldn;t knwo what i'm lookin at anyhow... so what should i look at...

so my ma in law has a 98 wrangler with a 4cyl in it...she recently lifted it 4.5in and threw on some 31's or 32's i think...now she is very unsatisfied with the performance and wants to swap for a 4.0...of course this is alot of money and she;s never taking it offroad beyond the dirtroad she...

anyone have one...my pa has one that is leaking...preferably close to mobile alabama or dayton ohio...

so got got the forward and aft ends lifted... i have this transmission drop kit and i would love to install it...it looks pretty straight forward so that should not be a problem...except... instead of bolts i have studs with nuts holding on the crossmember...does anyone know if they are...

mornin folks... i look in here on and off...i got rid of most of my jeep stuff since it was a money pit...and the fact that if it;s not a old as hell harley or a plane i can;t keep it runnin...but i still have a 98 cherokee... anyhow while i was in china for 7 months the beloved wife of mine...

98 cherokee 4.0 so the wife gets upthis morning to go to school...comes in and asks if there is a such thing as getting so cold the heater doesn;t work...i say of course...is the jeep heating up? she says yes it;s in the middle...of course she;s a woman so i go to investigate... she takes my...

2500 hardtop...softop...new radiator...decent tires...i also have a brand new motorcraft to go with it and a set of stock wheels with no tires on it... in wilmington ohio just outside dayton... needs some work...

how does one do this exactly... just by lookin at it...looks like i pull the axles out a bit to clear the carrier?then pull that out and remove the spider gears...and just the opposite to put them in...

full soft top door frames for an 87 wrangler... do tehy even exist?

RE: Re: Iditos In The News all my gauges are pegged out high...do they all shaer a ground somewhere? 87 wrangler...

RE: Ideas for trailering a CJ7--sealed bearing in T-case? sometimes my 258 misses...sometimes it doesn;t...the timing is good... lastnight on the way home after droppin the engine for my motorcycle off...i noticed that it only misses when the headlights are on...this is not logical at...

RE: I my cam... question...i have the springs the cam card suggests...but i am using stock lifters... i just got home from phoenix and started messin with it again...remember the oiling issue... would the stock lifters be able to handle the valve springs...could the valve springs be to...

from phoenix...goin back in two weeks... :shock:

RE: winches so i let the company rent me a 2005 mustang to cruise phoenix in... :D

Re: RE: clutch problems i think my flight leaves wed morning...i get back the 14th... anything interesting to see or do there? never been there...i'll be workin most of the time but i may get a day or two off on weekends or somethin...

it seems that my rockers are not getting oil after start up...the rear ones are but the ones for cylinders one and two seem to take awhile...they also sound like they are chattering running down the road or sitting still...they were all torqued down with the valves closed...and to 18 pounds...

sounds great...put a cheap flowmaster knockoff on it...they made me put a cat on it to... :roll: turned it down right afet ogf the crossmember... sounds good...it really does...i have on leadk though...it;s a threaded hole in the header that looks like it may be the thing that goes up to the...

RE: huge lift springs ok since the engine change...i have an electrical problem... my parking lights are on all the time...luckily i have a battery kill switch under the dash...maybe someone had the issure before i dunno... not all the time really...just now and then...last ngith i drove to...

RE: 3rd time jeep owner...this time i got it right! but now the transmission won;t come out of gear...it;s just my luck really...it won;t come out of 5th...no mater if the enigine is on or off...or the position of the transfer case... i have never seen a transmission like this...i can pull the...