Thread: power window to crank window
-
01-04-2012, 08:34 AM #1
power window to crank window
I have a few questions: is it possible to convert my power windows in my '95 gr. Cherokee to manual crank? Obviously I'll need to modify or replace my door panels, remove the electric motors and any related assyemblys and install some junkyard cherokee parts. But what all would I need to grab from the donor jeep and what all issues might I run into?
Just
Empty
Every
Pocket
-
01-04-2012, 10:47 AM #2
Trim panels. Handles. Window and window regulator. Sometimes they are riveted in place. A real pain especially if you are working in a wreckers. I've never seen a grand with manual windows.
-
01-04-2012, 11:39 AM Thread Starter #3
Thanks for the input. To clarify I'm planning to take the regulators and cranks out of a regular cherokee (not grand) and adapting to my existing windows (the glass is fine so need to replace) and just modifying the trim panels as needed to keep costs down. I will definatly bring along a cordless drill tho to remove the regulators.
Just
Empty
Every
Pocket
-
01-04-2012, 02:06 PM #4
Ok. Make sure the glass mounts the same. Usually the regulators attach to the glass differently in different models. Some are clamps. Some are screws.
-
01-04-2012, 03:10 PM Thread Starter #5
Jester; thank you for all the info. I'll do it bit of checking in regards to the glass attachment but I'm sure I'll be able to make it work.
Just
Empty
Every
Pocket
-
01-04-2012, 04:41 PM #6
Anytime. Good luck with the swap
-
01-06-2012, 04:27 AM #7
Re: power window to crank window
I HAVE TO ask; WHY???? usually people want to convert the "other" direction..... then again my 94 Dakota has factory power windows; and I hate the switch location.
-
01-06-2012, 05:38 AM Thread Starter #8
Namely its a 16 year old Jeep. Two of the windows have stopped period, the cost to replace the motors is outrageous, it's far cheaper to get some junkyard parts and take the time to convert it.
Just
Empty
Every
Pocket
-
01-06-2012, 11:31 AM #9
Re: power window to crank window
how bout junkyard motors for the 2 dead ones???? Kinda "split the difference" and no modifications needed from manual regulators; I see tons of these jeeps parted out on CL; the "hassle factor" would be less, fixing what you have.
-
01-06-2012, 12:03 PM Thread Starter #10
Thought about it but not worth it...once the conversion is done I never have to mess with it again, saves money, time, % hassle in the long run.
Just
Empty
Every
Pocket
Similar Threads
-
Trouble with power window
By jexee in forum Cherokee, Commander, Wagoneer and LibertyReplies: 4Last Post: 07-01-2011, 02:06 PM -
power window problems
By derreckjett in forum Jeep Electronics and AudioReplies: 5Last Post: 04-13-2009, 08:09 AM -
Power Window Regulator
By Surething in forum Cherokee, Commander, Wagoneer and LibertyReplies: 6Last Post: 08-11-2006, 01:56 PM -
Power window shorting out...
By Saurian in forum Cherokee, Commander, Wagoneer and LibertyReplies: 7Last Post: 10-25-2004, 12:39 AM -
more cherokee repairs...crank window on driver's side
By SeanD in forum Cherokee, Commander, Wagoneer and LibertyReplies: 0Last Post: 09-02-2003, 04:37 AM