Recent content by Atlwheeler32

I purchased my first jeep, a '94 Sahara, a few weeks ago and am looking for the parts below. I've been keeping an eye on the local pic-a-part lots but they never have any Wranglers and the dealership says these parts are no longer made. The driver's side plastic recliner cover in green A...

Thanks Ronan - just what I needed!

I just received a used copy of the 87-95YJ Chilton's repair manual for my "new" YJ and it's missing pages 1-28 and 1-29. If anyone can copy and send these in .pdf format it would be greatly appreciated! Thanks in advance!

Thanks for all the help. Anyone else......?

69jeepcj, Thanks for the help. Three questions: 1. Someone on another forum said, "Those springs look shot." Any evidence of that to you?? 2. Would you recommend 6.5" eye to eye shackles in the back to match the ones in the front? 3. Should there be some kind of company identification...

I bought a '94 Sahara about a month ago and am trying to determine the amount and type of lift. I can tell you that the measurement from the rocker panel to the ground (below the center of the drivers door) is 23" and I am running 33" tires on 15" rims. The Jeep looks like it sits a little...

Ok, after doing some work tonight here is where things stand: 1. All lights work except the driver's side parking light. This light works when using the blinker. I've swapped bulbs with the working side and got the same results so I know it's not that. 2. All hazard lights blink. 3...

Trying to get a newly purchased '94 YJ ready for inspection and need help sorting out a few electrical issues. All lights work/blink except - 1. Driver's side parking light does not work but does blink when blinker applied 2. Hazards don't work (bad hazard flasher?) 3. Blinkers on...

So I solved the issue I was having with the CCV system. The port on the intake manifold was clogged up. I thought the port was part of the manifold and didn't realize until last night that it is a bolted on piece. I unbolted it and it was clogged completely shut. Ran some carb cleaner...

JPNinPA - thanks for your response. I pulled the line at the back and can blow through it so there is no clog. I was going to replace the CCV valve thinking the issue might be there. Before doing that, I pulled the rubber connection at the intake manifold and placed my thumb over the opening...

Bounty What does it mean if I do not have suction from the rear line (suction from the intake manifold)?

I just purchased a '94 4.0 with 147K. I changed the oil and now, at idle, it sounds like the Jeep has a diesel engine. I've read many differing opinions on what it could be - either a lifter issue, a cracked exhaust manifold, or a normal sound for an old Jeep. I did not hear the noise until...

I did not hear the valve train noise until after I changed the oil. I was in a rush and was forced to use a Fram filter from W-mart. I have heard that this could lead to the noise issue. Any recommendations on oil weight and filter brand?

Ok, so I am new to the Jeep thing having just picked up a '94 4.0 with 147K. It runs strong but the engine at idle sounds like a diesel. From what I've read on here it's either a lifter issue, cracked exhaust manifold, or normal for an old Jeep. That's a story for another thread I guess...