Recent content by blakhole73

I am looking for some 1.5 inch wheel spacers, ans also would like to know which hei distribiutor i should grab from the junkyard. tghe motor that i have is a 304, any help would be greatly appreciated.

Again thanks for all the posts, I pulled the clutch apart, cleaned it and away we go. looked as though a botanist had set up shop in my transmission.

IT has not been started for a few days now. I am planning to tear it out this weekend, anyone want to come help give me a shout

There is no smell of clutch. Occasionally it will move, but much slipping when it does, this only occurs after working the clutch in and out several times. The whole gear thing has me puzzled.

With out engaging the clutch, i can freely move between all gears with no grinding. This has me really puzzled.

Weld The rears and selectable in the front

That sounds like a plan, will do this on thursday, and hopefully it will be ready to go again this weekend. Thanks for all the help, and assurance that it did not tear it up.

I feel like an idiot, I could have just used the expensive bumper acc. But hey I had to try it. Thanks for your response, and by all means if you think of anymore please post it.

That was my mistake,I did shift in the mud, thought that I could rock it out of the pit. Anyways I think that you are correct, but was just looking for some input. As far as the diffs go, I change them every time that I go just to be safe. But the clutch had nothing there, it was like pushing...

I am not sure but wondering what the chances are that it did hurt the clutch

I am wondering if i can simply take my clutch apart and clean it after getting stuck in some pretty deep mud and water. I did engage the clutch while stuck, and now the clutch is slipping. I guess that I can perhaps just clean it but need some more educated opinions than my own to figure this...

What a jack ass, if you know it all then do it.

Put in HEI distributor and cleaned the carb, all is well now. I guess that I just needed to get busy and quit looking for a easy fix. Thanks for all your help

Dont need the carb, did HEI upgrade and that cured almost all the problems that i was experiencing, and the wiper motor worked great.

The winch made by smittybilt was a great value. I used it four times in succession last night and it never got hot and was very quick. The line speed on this thing is amazing, and the xrc8 is plenty of pulling power. winchdepot.com 269.00+10 shipping