Recent content by ExtremeJeepYJ

1051999 i was getting about 14 mpg in my 2.5, now the 350 is on its way in so i'll see in another week or two what the new mileage is, hopefully not to much lower then 14[addsig]

1050728 its a 91, with a stock 2.5L engine...what about the distributor? the one i ordered is from summit and the mechanic doing the job thought it might be to big since it has the coil inside it, he said i might have to use a smaller distributor or cut the firewall...any clues?[addsig]

1050729 were you able to re-use any other parts? namely the starter/alternator?[addsig]

1050787 Depends, my jeep is a daily driver so i went with a reman engine and all new components, its a bit more pricy but also more reliable, the exhaust components dont matter, you're going to need a set of shorty conversion headers to make it fit, and a custom bent exhaust, along with custom...

1050788 If you're jeep is lifted check to see if a drop pitman arm was installed, and also check the steering stabalizer, my stock one was shot and after i replaced it my jeep handled like a completely different jeep[addsig]

1050790 My YJ would do the similar thing on occasion, and come to think of it it normally did it turning into my driveway which is a right turn, havent heard it for a while never really thought anything of it, let me know what you find out.[addsig]

1050791 I'd like to see a Jeep show up with a Planetary drive system, hummers are to big and bulky, nothing like a jeep to out manuver one on the trails[addsig]

1051109 Yep, got all the goodies we'll need as far as tools go, the motor isnt a drop in, it was a reman engine and reman heads, ordered all the other goodies i needed from Summit, yet to order the p.s. pump but did order the alternator, im pretty sure as long as we can fab. a bracket to mount...

1051127 im not to familiar with power steering pumps so i dont know what you mean by the pump resevoir combo, but where i add p.s. fluid and where the pump is isnt the same place so im guessing its not the combo, i think i'll just go ahead and get a GM one, as far as the firewall goes, i'd...

1051284 i got a 350 conversion radiator from 1800radiator, all i know is that its a 4 core radiator, i'd like to beable to remove the mechanical fan and fan shroud, that sounds like a good idea mudder...thanks[addsig]

1050705 Hey i was wondering if anybody out there could answer a few quick questions before i get ready to start this conversion on monday. 1) Will the jeep power-steering pump and steering box adapt to the 350? 2) What size distributor should i use? are the all-in-one distributors that...

1051099 I was searching through some old posts about doing a chevy 350 conversion and saw one in which you stated that in your shop this can be done in 3 days!!??!! everywhere else i've seen its taken a minimum of two weeks...im getting ready to start tomorrow morning bright and early, im...

1051851 a 2.5 L engine fresh out of my jeep this morning, its got about 119K mi on it and was running strong when i took her out. It's the complete engine you get everything except for the powersteering pump which i was able to reuse in my conversion, its got a radiator, starter, alternator...