Recent content by johns3b

Hello, I was wondering if anyone would be interested in a kit that would put in 2 wiper arms and 1 motor into a flat fender style windshield. I have worked out a plan and am building a kit. It uses 1 motor to run both arms, but all you would have to do is drill some mounting holes and wire it...

I wouldnt go with a aftermarket starter yet. I would start with the starter to make sure it is installed correctly. Did you have any washers or shims from the old one? If so did you use them or not? But it actually sounds like the starter is running after you shut off the key. Is there...

To be honest, I would take the broken bracket to a welding shop and have them weld it up. If they cant then anything that holds the pump in the stock location with the belt running in a straight line with the pulleys, and the pulleys being in line with each other. If the pulleys are angled at...

Did it always hesitate like this as long as you have owned it? You should notice some power loss on acceleration with the A/C on, as it is literally is taking power from the engine to cool off your jeep. If it hasn't, then something likely is wrong with the AC system. I would start there

With your hei, you should double check the grounding strap that is connected to the coil on the inside. It will make a conection and run, but it is really sensitive to ground. MAke sure the conevtions are clean and tight. I had the same problem