Recent content by mcgrnr0013

Alright. I ordered one from oriellys hopefully it will last a while. I'm just tired of pulling the transmission out. If anyone else has any suggestion please let me know.

Yes its an internally mounted hydraulic throwout. It has the bearing built into the unit. I'm not sure swapping the bellhousing and entire throwout is within my budget

hey guys i got an 89 yj with 258 and ax15. ive had this problem about 5 times now... the throwout bearing will bust its seal and leak out of the bell housing ive replaced it myself every time and just cant seem to find a quality one that will last more than 6 months. i was hoping someone on...

Ok I rebuilt the carb with no luck. Although I did find a little trash in the accelerator pump diaphram and the full power valve tube was blocked. But I think I found where the problem is. I believe the filter on the fuel pickup tube is getting stopped up because I can blow air through it with...

Okay awesome. I'll order the kit tomorrow, and will let yall know how it all goes. And I also want to thank all the people helping me out especially policemonkey161. You've been a huge help

Okay well where could I find a good quality rebuild kit that comes with everything ill need

im considering buyin a new carb since this one is already giving me troubles, any recomendation as to which would be best for it, motorcraft 2150, weber 38/38 or like one of the holley 2barrel?

When I regeared I went from 3.08 to 4.11. And I am positive that its not an intake leak because I used both gaskets and had problems with a air leak so I took it back off and put rtv around all the intake ports. When you say linkage are u meaning the linkage going from the pedal to the carb or...

it seems like a fuel related issue, but i cant figure out why it does great after its been sitting for a while and after it gets warmed up it starts actin all crazy when i give it too much pedal for too long. i checked the carb float and it is functioning properly. oh and i also have 0...

its manual and yes it will rev all the way to the redline without any misfiring or anything, it happened about a week after i regeared the rear axle, and about a month before that i had a bent intake valve that i had to replace. think maybe that could have something to do with it? the fuel...

ive replaced just about everything on the engine within the past 3 years. im stumped:?|

the regulator is set on 4psi and the plugs looked pretty normal, the typical tan/brown color and #6 had a lil grayish i look but not bad the plugs are in order from left to right 6 to 1

hey guys i got a issue here and im not sure what it might be, first of all its a 89 yj with the 4.2 and a weber 32/36 carb. ive done the nutter bypass too. it just started a couple months ago when i was driving to work it did great while it was cold but after it got good and warmed up it got...

had my drivers side tire fall off going about 45 down an old back road, scared the crap outta me. i went and fetched the tire (100+ yards away) and took the three lugs from my spare and put the tire back on and finished my trip to work haha

thanks for all the help guys, i really appreciate it. and today i think i solved my problems. i ended up taking the head off due too a hissing sound when i turned the engine over manually so i assumed it was possibly a leaky head gasket or my valve stem seals were shot, and actually the valve...