Recent content by offctr

  1. O

    1993 Wrangler FS

    SOLD.thanks for looking
  2. O

    1993 Wrangler FS

    here we go some pics of the seats /interior and the windjammer /tonneau which can also be seen at bestops website http://www.bestop.com/jeep-accessories/combo.html the rest can be viewed at my album on photobucket http://s59.photobucket.com/albums/g306/offctr/Jeep%20pics/
  3. O

    1993 Wrangler FS

    130K on vehicle less than 10 k on engine and less than 1k on transmission 2.5ltr 4cyl 5spd manual trans. Pioneer am/fm CD, tuffy security console interior "nutmeg" carpet and seats. No rust anywhere, Bought her new at Jasper Jeep in GA in 1993 and just dont drive her anymore. Comes as shown and...
  4. O

    Anybody rebuilt an AX 5??

    Oh well broke down and spent the money on a rebuilt its going behind a rebuilt engine and clutch so ought to get another ten years or so out of it. Dang it all though I was so happy yesterday morning when I left outta jersey that the old jeep was still hangin in after ten years plus -- the...
  5. O

    Anybody rebuilt an AX 5??

    I was afraid that was going to be the case. I may have to take a run at fixing it for now and replacing the whole unit later. More expensive in the long run I know but unless I can find one cheap at a local wrecking yard or fix the one Ive got I'm stuck for a while.
  6. O

    Anybody rebuilt an AX 5??

    I lost 5th gear in My 93 Wrangler around Allentown PA this morning,but nothing else 1-4 and R all still work fine w/ no vibration or noise other than an occasional sound I can attribute to leftover gear or bearing parts from 5 ocasionally getting knocked about in the case but it got me home to...
  7. O

    Rough idling and misfires in a late model Cherokee

    1058379 Actually the last time I looked under the hood I did not see any plug wires or even a readilly apparent plug location (possibly covered or shrouded) distributor etc I am pretty familier with the 4.2 and the older 4.0 as well as the 2.5ltr engines. Is the late model 4.0 (3rd gen?)...
  8. O

    Hard getting into 1st gear

    77000 Have you checked to see if the Hydraulic throw out bearing needs to be bled or is leaking ( as well as the clutch master cylinder itself)look for traces of brake fluid running down the inside or outside of the firewall below the cyl or pedal(it can hide in the carpet backing) It can run...
  9. O

    Getting around state emmisions regulations

    122000 That's true Canadian built or not ,if not specificly built for export outside the US & Canada ,it would have had to comply with federal rules requiring a catalytic convertor. Everyone spends so much time and money trying to get around them for minor if any horsepower gains. dont waste...
  10. O

    4.2 engine with 4.0 head

    129000 Actually this opens up some interesting tech possibilities ,but first after reading the article two things , One they noted that the engine in question had 98,000 miles on it and looked better than they expected no carbon buildup etc ,This is characteristic of the jeep sixes as a matter...
  11. O

    4.2 engine with 4.0 head

    131000 Oh the advantages of fuel injection over a carb are manyfold. A properly functioning mpi or tbi system will out perform at severe angles any carb, let me put it this way the two vehicles I have that are FI 4cyl wrangler & 6 cyl cherokee both start easily run great and get good milage...
  12. O

    4.2 engine with 4.0 head

    133000 Actually that was my feeble attempt at sarcasam , I put one of the original pro-jection TBI systems on an 86 dodge 4 by truck to get rid of the carter bbd that came as stock on the 318 and had given me no end of trouble as well as no horsepower for a v-8. Anyway the holly system WAS an...
  13. O

    starting problem....

    142000 On an 86 it may be early enough that you can buy a replacement ign switch (cheap)that already has the harness that you would need to thread down the colum if you actually replace it ---But what you can do is disconect the existing one at the connector below the dashboard above the colum...
  14. O

    89 YJ hard shifting into 1st - AX 15

    170000 I know you said you watched the fluid level in the clutch throwout bearing but have you bled it or re-bled it after installation ? I had to re bleed mine about two weeks after I put it in no loss of fluid or any thing just somehow some air got trapped in there I guess. Anyway just a...
  15. O

    Already asked this and I've changed my mind...I think

    182000 the AMC 360 is an in house motor it uses some weird parts like ford ignition chevy or chrysler trannies if automatic and depending upon year but it actually has more in common with the other AMC motors 304 & 401 than anything else The Chrysler 360 is the largest of Chryslers family of LA...
Back
Top