Recent content by Skinny Pedal

Cyber Monday Sale Today 12pm - 8pm eastern

The title says it all!!!!!!! This will apply to Skinny Pedal Products items only, no other manufacturers. You'll have to check out the site Monday to see the deals.

Get a hold of me for more info or a quote on some Christmas Goodies!!

Here is a few shots of one leaving tomorrow. The 7 way trailer cable runs to your switches to control the relays. The wiring with ends on is used to connect your accessories to the block. You plug the connector into the block and run the other end to what ever it is you are hooking up...

Want a nice stereo system to stay put in your Jeep? The best way is to keep it out of sight. Take a look at this picture and tell me if you can see an amplifier. Its there and its not going anywhere! Amp Mount Link

Do you need to turn this Into this Many configurations to choose from. 5 fused 35 amp relays and 5 aux fuses 20 fuses 3 fused 50 amp relays and 7 aux fuses Control Freak Link Feel free to ask about the different configurations. Best way to get the correct info is to plan on what you...

Thanks. They really let me dial everything in before I turn down the aluminum for the final links. They are really stout and allow me to twist up the axles for clearance.

I found a classic shot or two of Jason's rig, including his passanger.

I got the mock up control arms made. They are adjustable so you can set your joint position and then collapse the arm to find the right length. Tube clamp to secure arm length. Adjustable lower. Adjustable upper. I will have to dimple the tub above the arm on the corner to clear at full...

Got the axles all cleaned up today. Flipped the brake brackets on the rear to get them out of the coilover's way. Set the truss on for a visual. It will get tied into the new diff covers that are not on yet. The axles will also get a full length truss on the tubes.

Got the brackets all ground off today. Then saw this in Jason's muffler.............. STAY OUT OF THE EFFFFFFing WATER! I saw I had some wheels and tires for another project sitting around. :D Here is what we are really going for. 100" wheel base and a ride height like so. This will also...

Here is a little info on the build. I'll let JayDub fill in the rest. He had a long arm kit that kept failing. I'll let him describe the issues with it. 2004 Jeep TJ Rubicon 16" Front FOA Coilovers 14" Rear FOA Coilovers 4-5" Stretch Aluminum Skids Aluminum 3 link front, 4 link rear PSC...

It constantly changes here. I run 17x9 wheels and 37 1250 KM2s. Last weekend they were at 4 psi in the snow and 6-8 psi in the rocks. Thats with no beadlock. It all depends on the wheel, tire, sidewall and your type of wheelin.

I am waiting on one final measurement for the JKs. I need the door hinge pin diameter. The TJs are 3/8". If they are the same size then the hangers will work with both. One side up will fit TJ, LJ, YJ, and CJ rotate it 180 and it will fit JK. If anyone has a JK that could take off a door and...

Okay since I have met the minimum, in like 3 hours :D , here is the link to pre-purchase. Door Hangers : Skinny Pedal Products! I am doing the pre-purchase on this first batch to get things going. I will be starting to make these next week and should have them shipping the week of June 14th...