Recent content by vickery_ray

I replaced all the spark plugs last night and she fired right up no problem. I admit it took me a day or 2 to realize where they were. I still have no idea where the wires cap and rotor are. I'm use to seeing a distributor and wires that take me to the spark plug. Sad I know.

Radiator replaced, transmission cylenoid replaced, fuel filter replaced.... Now my 2000 jgc runs ruff, shakes, and sluggish. Getting a p 0306 which to my understanding the last number means the cylinder that's not firing. Never happened till after I changed the Fuel filter? This jeep is really...

Sorry about all the confusion. Last week I had the guys at pete's stop motor company in Pinellas Park replace my radiator. They tried charging me for a bunch of crap and give me a big run around to find out they didn't get all the air out of the cooling system, like where the water pump is. I...

Slips out of gear easy to then changes gears at weird rpm's like it's the trans mission

I changed just the reg fuel filter that's back behind the driver side rear tire. Bolted to the under carriage nothing else.

I got a different filter and it went on fine. Now it runs very ruff and is giving me a code p 1763? It ran fine before i changed out my old filter.

I changed my fuel filter yesterday but I couldn't use both o rings in the biggest plug on the filter. It only had a small small space left to slide down before it would lock. I took the top o ring out and it fit. Just one problem it needs the 2nd ring to run properly. Is there a special tool I...

I disconnected the battery, took apart the dash unplugged everything that looked like it went to the Ignition and plugged it all back after several minutes. A day later the light came back on.:/

K so I put the key in the ignition and on the 3rd turn over it thru up the code. P1686. And as far as I can tell all the fuses are ok. Also the back hatch won't lock

Ok so I have this 2000 Grand Cher and the security key indicator light is on. I think I asked about this before and someone said something about a skim system. The dealership said it wasnt the key cause after 3 times of cranking it it would no longer start. They said my dash cluster was bad or...

Is there a way to check the rod or adjust the rod without disconnecting all the hoses to the master cylinder? i jusr replace the rear brake pads in my 2000 jeep grand cher and can smell the brakes burning on the rear right passenger side again?

Cool, thank you so much. I will definitely try to find a loose connection first. I'll let ya'll know if it works or not. Come to think about it it never started happening till the first actual cold day we had here. Im sure that with my subs could have cause a loose connection.

For the past four months my sensory key indicator light has been on. I drive a 2000 jeep grand Cherokee Laredo 4.0. It cranks up everyday and seems to run fine other than the dinging sound, gauges stop and then start working again, and it also sounds like it checks my windows and doors...