Search:

we watched a video on installing those fenders and the video showed to do it different than the instructions that came with the fenders do. i think we would have gotten the one side done saturday...

Put the back bumper on and started putting the flat fenders in the front. What a pain! Still not done with one side and I think we started before lunch.

And still can't post pics. No idea why...

Got a rear bumper with a tire carrier from a guy who didn't like that his front one was a regular looking one and the back was a tubular style. Since we got that front bumper either the over rider...

Dang!! /\

ha ha ha

wow, they must have let some really corrosive fuel sit in that carb, it ate up the bowl and the bottom of the mount tube.

are you going to get a ball wire brush and put it in the drill to get...

it will be fine than. be sure to put something over the primer though, like some type of spray paint. primer is porous and moisture will seep through it allowing the metal to start rusting again. ...

if you treat the rust and prepare the area, body filler is fine.

It might just be a plug for a body hole. That's in the floor, under the carpet?

If I washome, I would say swing by but I just landed in dallas on the way to fort Carson colorado

It could be a bad fuel pump but check for pressure first. Could also be the crank sensor so check for fuel pressure at the Schrader valve on the fuel rail and check for spark at the spark plugs

cool. be sure to post pics

welcome!!

no idea if its a good one or not though. i always had older wrangler and jeeps. the newest i have had is an 07 and i had zero problems with it, or any on the older ones

dirty crank position sensor?


i have no idea but just thinking since you said holding hte rpms up might keep it form dying, maybe its a dirty something? throttle position sensor, crank sensor,...

my buddy put fog lights into spots like that on his car bumper using double sided tape. they stayed on and we drove all over the south east states on the weekends back in the late 90s. we were...

yup, ha ha ha

its easy to swap to a better looking tailgate while you have the one removed. i changed my yj to a cj tailgate, back when i had a yj. my son wants to change the tj to a cj tailgate now, too, since...

Ha ha ha, nah. I am thinking of new tires though

drove the tj into work since it hadn't been driven in a few weeks. still runs good

you will probably have to cut it if all the stuff you did did not help

yup. super easy to add that stuff in

Ha ha ha

Maybe just called panel or lower panel with lighter?

Not snow often in south Texas but they still rust here, I live a half mile from the ocean and always have vehicles rusting out.

It sucks

That's probably exactly why /\

That looks like it's a placed dimple because it gives clearance for something. But it's also very old so I wouldn't worry about it.