Search results

How long are a set of tires lasting you? ( in mlies ) As with any jeep you need to rotate, balance, and do an alignment all at the same time atless every 30K. On my jeep ( 06 Rubi 285/75/16 ) By doing this I've gotten between 35K to 40K on the tires I've had. Check with tire shops around you...

Could be a bad ground. Check the plug for the head lights might have some rust on the conections or a fraid wire

1, spray all the bolts your going to remove for a day or two with BP before you try to remove the bolts. 2, Make sure you have every tool you need BEFORE you start. 3,Make sure your jack stands are tall enough. 4,Take your time. 5,Retighting every bolt after 100 miles

Some of my friends have yjs. To get the extra 5 gals. this is what they did, and it worked for them with no problems. Wrangler YJ Gas Tank Modification 15 to 20 Gallons

From what I found 2000lb. is it for a jeep. thats with trailer & load.

Spindle Nut Socket: 1/2 Drive*A692N by the Jeep Specialists | Morris 4x4 Center 2-1/16''

Jeep Service Manuals

Just Empty Every Pocket Sorry I had to do that. But yes it could be a rubber hose before it goes to the fuil line.

Jeep TJ Suspension Lift

Before you buy anything find a store or someone that has them and sit in them just to make sure you like them, and they fit you well. Like jeeps, all seats are different.

I like TerryMasons post,he makes a good point. Also from what others have told me that adding spacers put added stress on the ball joints because your pushing the tire out further.Kinda like holding 10lb. close to you, then holding 10lb. at arms lenghts. Have you checked yours yet. May be they...

For $1200 you can build a nice 44 or 8.8. Check out all the salave yards around you. Salvage Yards in Texas TX Junkyards Directory

Well like I said, drop me a line if you need some help

Along with checking your steering check your unit bearings up front. It could also be a bad bushing on your UCS/ LCA.

JEEP 2.5 LITER ENGINE (1991 - 2001) | JEEP 2.5L CRATE ENGINES & MOTORS I realy don't know how much it would be to rebuild a engine, but their price for a engine is $1,150-$ 449 core- 7/70K warranty.

I'm sorry , I just saw you live in Fort Lauderdale. I'm here in Pembroke Pines just west of 75. If you need help just drop me a line and I'll do what I can for you.

I have a 06 Rubi w/ 4'' lift and never installed it, but mine is a LJ. But on a SWB wrangler you will probley need it. Every jeep is different.Try without it and if you get vibration then install it. Or you can do a MML.

If you have done a lift before on a CJ you can do this. It's only bolts.On a Rubi you should not need a SYE because of the TC ( they don't need one ) If you have the LJ Rubi you should be fine with out the TC drop. Read everything first, look at what you need to unbolt and make sure you have all...

Check your unit bearings. You might also have a bent tie rod causeing the drag link tre to hit the bracket ( on the axle ) that holds the swaybar link. The best thing to do is have someone in the jeep turning the wheel and you looking at everything while they turn the wheel. Off typic: I have...

Down here in Florida it is almost a must to have a snorkle. But as stated before you still need to protect your electrical. Waterproofing Your Jeep's under hood Electrical components