Search results

Something to think about! How old is the thermostat? Upper and lower hoses? Since your in there and will have to add antifreeze anyway why not go all the way. The key to replacement is MAKE SURE EVERYTHING IS CLEAN. Especially the bolt threads. I haven't done one on an 88 cherokee but I use No.2...

Try this: Car-Part.com--Used Auto Parts Market

I assume your system is not working. If it is working, leave it alone. No cheap way for you to do it yourself. Once the system is opened you have to evacuate it with a vacuum pump and make sure it holds, recharge with the proper weight of R134, and the correct amount of PAG oil, all with the...

You really have to drop the pan first. If you have metal slivers/shavings in the pan/fluid/magnet the trans is shot. This is not the metal dust on the magnet.

It was the courtesy lamp relay.

Just got back from messing with it. I think I found the problem(s). Definetly one problem is the relay. Swapped it with another and no ticking. I disconnected the overhead console and no draw. Plugged it back in and draw. When I pulled the grey connector no draw. Plugged it back in and bright...

Thanks Definetly fuse #7. The ticking noise came from the courtesy lamp relay. Pulled it and still a draw (bright) but the test light is not blinking.

Pulled each one and still a ticking sound and draw. I am pretty sure that the sound is coming from Body A in your pic.

Doors are all closed. Is the red oval CB2? Can I just pull it?

Turn signal not set, still drawing power. Pulled fuze 13, still drawing power and I can hear a ticking sound from the passenger kick panel fuze box when I touch the test light probe on the neg post. I'll also pull each of the other fuses to doyuble check but I think I've already pulled each one...

The 40 AMP (Ignition Off Draw) is under the hood. Neg battery cable off and test light wire clipped to the neg cable and test light probe on the neg post.

I think I am having the same problem to an extent. 98 JGC Laredo I6. My DMM must be shot because I can't measure Amps so I'm using a test light. Destroyed two batteries so now the neg cable is off. Here is what I'm experiencing, a big parasitic draw (bright test light flashing). Pulled fuse #7...