Search results

sounds like fuel pressure is bleeding off. Could be a failing fuel pump, or a failing injector, definatly a fuel pressure problem.

Lmao, Im a contractor for the Post Office currently, been trucking 22 years, LAST NIGHT I stopped at a Pilot (usualy I dont stop anywhere, just go and go), and I saw these big looked like gallon cardboard jugs with "DEF" written on them, also they had signs everywhere saying "DEF" is now...

So go with the 33"s and save a little for a good 3" lift, then you'll be set and good to go and it will look good too, you wont be dissapointed

I was wheeling pretty hard, I'm guessing I was on Metal Masher in Moab when it let go, the scary thing is it never made any noise at all, not even driving back in to town, silent as could be, thats the part that worries me most was that I didnt know it had gone.

I just installed a set of Raybestos unit bearings from Rockauto.com, I did 2 trails, one pretty extreme, then 3 days in Moab (trailered there and back, did 2 lvl 6 and a lvl 4 trail there) so it had about 150 miles or less on them (I did both sides at the same time) when I was getting ready to...

You should watch spartans videos on what makes axle shafts break :)

I have seen one axle break, and it was on rock, and he was running 33"s on stock shafts, sorry but I agree, the D-35 isnt the "ticking bomb" that people like to make it out to be, I understand they need a reason to feel compelled to put an 8.8 under their Jeep (c-clips for all lol). I would...

Well, if you do end up going your seperate ways just remember what Plutarch (46-120 C.E.) said "When the candles are out, all women are fair"

What you have in most Jeeps, YJ, TJ, and JK is a sport bar, not a roll bar, the bar that drops verticaly next to the seat is the only bar that comes near the frame, and that only by proximity of a body mount, the rear bar bolts to the tub above the tail lights, and even worse, the front bars...

oh yea, duh, sorry, I see now, Rubicon, this is why I should type first thing when I wake up lol :)

I dont know how you get away with a 6" lift and not a SYE to begin with, but thats what you need, seriously, get the trans/trans back up under the body where it belongs, about the easiest way to do this in your case is to do the 1.25" bodlylift so you can do the 1" motor mount lift. I am a huge...

My daughter likes mud, she brought home her truck once just coated in mud, took her 3 weeks to get it all out of the suspension, and never did get it all. As prone to rust as Jeeps are, you might want to concider what mud is, is a sticky bit of wet dirt that when stuck to your jeep, acts as an...

I dont know what it takes to get a JD or CAT alternator to bolt in your Jeep, what I do know is your Jeep came off the line with either an 81 or 117 amp alternator in it. This is very very easy and simple to fix, pick your favorite on every corner parts store, for myself I use www.rockauto.com...

World of Warcraft

We were there doing the RR4W Labor Day, a little rain monday but Wow what a wonderful place, Moab is my happy place, this time down we managed to run PSM, 7M (easy day) and MM. and of course hit the new shops downtown (finaly got the decals for all the runs weve done since '05, $53 worth of...

For about a year and a half I have been running a Rugged Ridge 8500 lb I paid $300 for from Quadratec (you can find them with cheaper shipping), I have winched everything from Jeeps to full size Ram Chargers to new and old FJs and never had a problem, you can also get 18k lbs snatch blocks from...

93 Jeep YJ for sale with100K miles only 1991 JEEP WRANGLER YJ 1995 Jeep wrangler - modified 1991 Jeep YJ Wrangler 1994 Jeep Wrangler 89 Jeep YJ for sale 88 Jeep YJ 1990 jeep wrangler yj 94 Sahara YJ Wrangler Have an Illinois YJ :) took me about 5 min to find these.

It probably wouldn't take much to make a YJ grille fit on a TJ, a lot of grille related installation instructions, fenders and things like that, are the same for both models. I think though most people would say Jeep went back to round headlights to get back to the half a century they had them...

I just looked it up, Rockauto.com, OEM frame $105.89 Part # CH1280101, they also have another provider thats $111.79, and the Omix-Ada through them is $182.79. This is an amazing site for OEM parts, I got Raybestos unit bearings from them for $110 for both and shipping was only $17. when you go...

If I spend $35k on a Jeep, it will be about $13k off the lot and I can easily spend $22k building, I mean, a nice set of store bought bolt in D60s are $10k of that isnt it lol