Search results

1045286 hell ya its a good enough, i roll 31 which arent big but i can climb as good as my buddys 75 cj5 w/the 258 in it and if you got a 91 then you have real fuel injection instead of that throttle body injected unit put an intake a spacer exhaust on it and hold on not really but it will help...

1045287 try quadratec they sell aluminum valve covers so if they out of stock in your area they might have one dont they have some kind of ploicy if they are out of stock shipping is free or somthing like that? good luck also the valve cover gasket is only 7 dollars and a tube of red RTV is...

1045288 dont know if this helps mine drops down to around 40 at idle thats in the middleish and up to 60 at over 1500 rpms mine does how ever have a million miles like around 155,000 give or take 600 or so. marc[addsig]

1045289 one more thing all of my gauges are in one peice are yours the same, if so can you order one with out getting all of them or do you have to replace the whole strip because mine are rusty, and kinda yellowed, thanks marc[addsig]

1045825 even easier cut the 90 degree elbow of your old intake hose go to advance auto by one for a honda civic APC Intimidator 49.99 comes with filter, tube a cool looking hose for your breather put the 90 in the polished aluminum tube use the reducer that comes with the intake for a tighter...

1049167 Jks makes a telosoping tac bar for the front on yj it is $199 and slides inside of itself when a bolt on a johnny joint is loosend i Have the front one good investment but i cant tell a difference when its loose or not the real big differnce comes when you get rid or disconnet you sway...

1049179 I am not sure what you are talking about your discription was very vauge, do you have a cj, yj, or tj if you have a yj the only thing that i can think of that locks would be you shift motor for to engauge your front axle, if so there is a part in quadratec that elemnates the vacume stye...

1049650 I dont know what year you have or motor size but in my 91 i was getting alot of move ment in my transmision and transfer case so bad that if i was in a bind and had to reverse the shifters would actually hit you in the leg, what i did was make a braket and attacted it to where the...

1049676 this is no joke when the level in your tank goes down so does the presure of some like that the vacume or somthing at least that what the guy at the dodge dealer told me and also if you leave your gas cap of you loose gas mileage, he said when there is a woosh when you take of you cap...

1049677 its worth a dollar to me, i was thinking the same doesnt the 87 carb six the 258? but they did say they would trade even and give me 300 dollars only becase i got some super kill grill that i found on a trail and welded to my stock bumper marc [addsig]

1049680 I dont think your manifold would warp because its a cast design unless it was so far in red zone the gauge broke and you poured ice water on it but then it would just crack, if all else fail instead of having you manifold milled just get a header, they are fairly cheap when you...

1049686 I thought about it but then again I have a yj and then i would have to take off the front part of my roll cage seems like a lot of work to get hit in the face, I dont think it is very practical but dont some compitions require the glass to be removed or you have to fold it down...

1050164 thanks guys, i find out today if i get the 87 or not, i decided to keep my 91 for my wife she says she loves so i was like what ever i however bitched enough about everything that he is going to let me have it cheap, I am going to fool with it for a little while see if i can get it to...

1050167 the great thing about cjs are there is no engine mangament computer or anything of that nature and my I sugest just by any fuse box the one in my jeep is from a 96 camaro and my jeep is a 91 but you will find that the fuse box to chevy and fords a cheaper they all still have flasher and...

1050168 Is it a running rich or too lean also if you havent tuned and you took is strait out of the box check and see if the floats are sticking I would also look at the choke is manual of a vacume choke check the fittings off the manifold if that where it gets it vacume also what about the...

1050169 I havent done the computer but the fuse box yes I went to home depot and got some weather stripping I need it for the house and had some left over took it out side crammed it both bottom holes and stuffed it in the lip of the top part of the box tight fit but I sure i works I have never...

1050454 i made mine from a honda civic intake non v tec i got it at advance auto parts for 55.00 dollars and cut the 90 degree elbow off of the stock tube jamed it in the 3 inch aluminum pipe silconed it up and was done with it came with the hose already and the inlet to put it in then i...

1050456 adjust your linkage if its that hard to shift when you have your jeep off and place it in gear depress the clutch it will it should start to pull while you start because what i can tell by your post the clutch has finally seated and my need to be reajusted also what type of clutch did...

1050663 or it could be blow by real bad blow by from the way it sounds my be time for a head job to valve seals sound shot. marc[addsig]

1050793 thanks guys, i tried the pushing down the throttle thing with no avail, I talked to a guy at the auto parts store where I bought it and he said that i can adjust the curb idle speed with out voiding the warenty so i will try it thanks for yalls help marc[addsig]