Search results

This is an approximation of the wiring; I have a bag of relays from the other projects over the years. the ones I'm using now are 40 amp that I purchased new last year. I'm beginning to suspect the light switch but, I may go with a foot dimmer before this is over. Sorry for my indelicacy...

Okay grounds are solid and I found that one of the headlights had the wiring reversed for ground and hi beam. Also different wattages of H4. They are working now when switching from Lo to Hi beam there's no issue, but switching back from Hi to Lo beam and they don't reset to Lo unless I cycle...

Thanks for chiming in JpN, hope you've been keeping well. I'm going to check the grounds this afternoon. Also After I went to bed I was thinking about this and it occurred to me that the headlights on This setup may be on a fused circuit. On 'Black Betty' they're using the same PDB.

I've wired up my other DD with relays as I've done with so many vehicles over the years including my '78 CJ5 'Black Betty'. The trouble that I'm having is with verified wiring to/from the Ford PDB I'm using is initially I have 12 output availablefor low beams. Then suddenly 3v down to 1.8v WTF...

I know of a guy on another forum that with his fiberglass tub the profile left his front roll bar higher that the windshield, I bet he wouldn't mind as a stop gap to have a slightly baggy top. :p

Any progress?

Re: 1054589 back in '67 our late great governor Tom McCall had a fight on his hands over beach access. I was young but remember the ongoing flap a decade later but knew how beneficial it was and is.How Oregon almost lost public access to its beaches | Offbeat Oregon History

From day one of my furlough, (I drive a bus) I dedicated myself to projects. 1. Got the fog lights working again on Black Betty 2. Got the driving/off road lights working again 3. Moved the radio antenna so it wouldn't be infulenced by the larger rear tire 4. Did the headlight conversion on my...

This link; I-6 'TeamRush Upgrade' (definitive) - REPAIRED Link version - JeepForum.com has helped lot of folks in a similar predicament.

...or a Jeep bondyard, bummer that Mac's is now closed. Godspeed Mac!

X2

As for me, ever since the original Pioneer Supertuner came out I've been hooked as their receivers really reach out. As a benchmark living in the central Willamette valley in Oregon, if a head unit could pull in KGON up in Portland (88 miles away) I figured it was great! Ever since I've stuck...

Hey IWant, I can dig your post about wanting to stick with old school points ignition, but for the advances over the years breakerless ignitions are much better. Black Betty is an old '78 running the Ford EEC 1 that I also found in my '81 Ford panel van. So I'm guessing that they're rather...

Thanks so much JPN, I was that one the other day too. :-) At first I thought it may be the bridge retifier but using my multi meter the Ohms & Voltage checked out, it may be a switch on the PSB that's the cause but in the meantime I was able to find my old Battery Tender Plus that I used to...

I ran a voltage test on the newest and it was charging at 5.28V, the older one at 2.59V I'm thinking there's burned out diodes in these guys that I may be able to repair, if'n I can find my no. 1 phillips, and get the parts from Mouser.com or somewhere.

Howdy all, I've since got a Schumaker battery charger for my charging needs to replace a pair of NAPA 85-323A chargers. This isn't the right forum I think but given all of the work done in this section I thought it may be appropriate. These 85-323A's seem to continue charging without going...

Got the aforementioned off road lights aligned, had to tweak the brackets as they were aimed to close forward. Also remounted my 102" whip antenna for my radio as once I got into '32 inch tires the antenna was resting against the spare.

After several months got the off road and for lights working again. Bad ground on the off road lights and on the latter when I installed the single DIN Pioneer head unit into the dash I knocked the connector off of the switch... Of course I traced the entire wiring harness for the lights before...

Where I was a station manager for Skinnymutt, I'm now back on the road as a driver for an airport shuttle bus company and, in compared to recent years I'm making more $ too. It's a great feeling not to have to daily make excuses for a company that you know is... well.... not a good one. Had to...